What is the delivery time and warranty?

2-3 months after deposit confirmation, 12-month mechanical warranty and 6-month electrical warranty with on-site installation, commissioning, operator training, and 24-hour remote technical support included as standard after-sales service.

Fully Automated Internal & External Fbe Coating System for Steel Pipeline Production

Name: Fully Automated Internal & External Fbe Coating System for Steel Pipeline Production
Brand: Qingdao Huashida Machinery Co., Ltd.
SKU: 2183650882

Shandong, ChinaQingdao Huashida Machinery Co., Ltd.

US$232,500.00-348,800.00

1 Piece

Product profile

Customization

Available

After-sales Service

Overseas Installation, Free Technical Supporting

Warranty

12 Months

Model NO.

325-4200mm

Type

Coating Production Line

Coating

Powder Coating

Substrate

Steel

Certification

CE, ISO, RoHS

Condition

New

Pipe Cleaning

Internal External Shot Blasting

Pipe Diameter

325-4200 mm

Application

Anticorrosion Pipeline Production

Spray Powder

Fbe (Fusion Bonded Epoxy)

Cleaning Grade

SA2.5 (Internal & External)

Internal Blasting Range

325-4200mm

External Blasting Range

48-4200mm

Coating Configuration

Fbe Powder or Liquid Paint (Configurable)

Coating Standard

Sy/T0413, GB/T23257, DIN 30670, DIN 30678

Internal Fbe Thickness

200-400μm (Customizable)

External Fbe Thickness

200-800μm (Customizable)

Processing Output

3-8 Km/Day

Annual Capacity

2 Million M²/Year (φ508mm Basis)

Heating Method

Medium-Frequency Induction Heating

Transport Package

Standard Package

Specification

1200.00cm * 230.00cm * 260.00cm

Trademark

Huashida

Origin

Qingdao, China

HS Code

8477209000

Production Capacity

30 Sets/Year

Key features

Fully Automated Internal & External FBE Coating: Both pipe walls coated simultaneously in automated pass, eliminating manual intervention and two separate coating runs for steel pipeline production.

Sa2.5 Internal & External Shot Blasting: Achieves international surface cleanliness on both pipe walls simultaneously, maximizing FBE adhesion and eliminating delamination risk in buried steel pipes.

DNV, DIN 30670 and SY/T0413 Certified: Meets the strictest international FBE internal external coating standards, supporting global steel pipeline production project bidding and regulatory compliance.

Zero-Emission Powder Recovery System: Professional cyclonedust collector eliminates airborne FBE particles, meeting CE and ISO environmental standards for steel pipeline coating factory compliance.

99.8% Operation Stability: 100% factory trial run before delivery confirms every fully automated FBE coating system operational before shipment, minimizing commissioning risk.

Company profile

Importers and ExportersFull CustomizationQuality AssuranceR&D Capabilities

Qingdao Huashida Machinery Co., Ltd.

Shandong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 22 years CertifiedNearest Port: Qingdao PortAverage Response Time: ≤4.08h

AI-Powered supplier vetting

SummaryQingdao Huashida Machinery Co., Ltd. is identified as a combined supplier producing mechanical equipment, plastic machinery, general machinery, and plastic products. It reports five production lines, six to ten quality-control staff, stated output of 70 plastic pipe extruder sets and 2,000 tons of heat-shrink sleeve annually, and order fulfillment within 15 working days in both peak and off-peak seasons. The supplier offers extensive customization, ODM services, and OEM services for well-known brands. Its after-sales commitment includes a 12-month installation-based guarantee, troubleshooting, spare parts, and free technical training, followed by lifelong service at the buyer’s expense. Export activity has continued for 21 years, with 51%–70% of sales from exports, primarily to Southeast Asia, the Middle East, and Europe. Evidence also shows valid contracts with associated subcontractors and written service-management procedures. However, no new products were reported in the past year, no SDK is...

Supplier typeThe supplier is classified as a combined company, with business activities covering wholesale of electrical equipment and the production and processing of plastic machinery, general machinery, and plastic products. Its primary offered product is identified as mechanical equipment, and the English company name is Qingdao Huashida Machinery Co., Ltd.

After-Sales capabilityThe supplier commits to a 12-month guarantee from installation, subject to a maximum of 14 months from delivery, with troubleshooting, qualifying spare parts, and free technical training during the warranty period. It also reports written and followed procedures for service-capability assessment and corrective/preventive actions, although the approved-supplier list lacks signatures or dates.

R&D capabilityThe supplier reports ODM capability and broad design-service support, but states that it had no new products in the past year and no available SDK. These facts show design and ODM service capability but do not demonstrate strong recent product innovation.

Production capacityThe supplier operates five production lines, has six to ten quality-control staff, and reports annual output of 70 plastic pipe extruder sets and 2,000 tons of heat-shrink sleeve. It also reports inventory capability, valid manufacturing contracts with associated subcontractors, and fulfillment within 15 working days in both peak and off-peak periods; however, finished-product inspection has instructions but no written records.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. It also provides ODM services, supporting a broad stated ability to adapt products to customer requirements.

Client casesThe supplier reports providing OEM services for well-known brands and has exported for 21 years, with 51%–70% of sales from exports to Southeast Asia, the Middle East, and Europe. These statements indicate international and branded-customer experience, but no specific customer names, projects, or verifiable case details are provided.

Product Q&A

Q:What makes this a fully automated internal & external FBE coating system?

Internal and external shot blasting, medium-frequency induction heating, simultaneous internal and external FBE epoxy powder spraying, powder recovery, and pipe end trimming all run automatically in one continuous PLC-controlled system, eliminating manual intervention across the full steel pipeline production process.

Q:Does this system coat both internal and external pipe walls simultaneously?

Yes, internal FBE epoxy powder coating and external FBE coating are applied simultaneously in one continuous automated pass, eliminating two separate coating runs and significantly reducing coating time for steel pipeline production projects.

Q:What surface cleanliness does the integrated shot blasting achieve?

Sa2.5 international surface cleanliness standard on both internal and external steel pipe walls simultaneously, ensuring maximum FBE epoxy adhesion and eliminating delamination risk in long-term buried steel pipeline service.

Q:What international standards does this fully automated FBE coating system meet?

SY/T0413-2002, GB/T23257-2009, DIN 30670, DIN 30678, DNV, SY/T0315-2005, and CNPC38-2002, covering Chinese, European, and international steel pipeline FBE internal external coating compliance requirements for global project bidding.

Q:What is the operation stability and processing capacity?

99.8% operational stability confirmed by 100% factory trial run before delivery, with <250m.sq/h sustained processing capacity and 0-6m/min adjustable line speed across all steel pipeline diameter configurations.