To which country did you sell your 3PE equipment?

We have produced nearly 50sets 3PE processing line at home and abroad. Such as Russia, Iran, UAE, Iran, India, Belarus, Kazakhstan and so on.

What is the after-sales service policy?

Warranty period: Before delivery all the equipment must be trial operated to confirm the quantity perfectly. The warranty period is 12 months from the date of pick-up for mechanical part, and 6 months for the electrical part. Service: We provide technical services and provide training and guidance to buyer operators.

High Efficiency Energy Saving 3PE Coating Line, Low Power Consumption

Name: High Efficiency Energy Saving 3PE Coating Line, Low Power Consumption
Brand: Qingdao Huashida Machinery Co., Ltd.
SKU: 2192918472

Shandong, ChinaQingdao Huashida Machinery Co., Ltd.

US$100,000.00-3,000,000.00

1 Set

Product profile

Customization

Available

After-sales Service

1 Year

Warranty

1 Year

Model NO.

HSD 219-1620

Type

Coating Production Line

Coating

Powder Coating

Substrate

Steel

Certification

CE, ISO

Condition

New

Model No.

Dia 58-4200mm

Blasting

>2.5A

PE Thickness

2-3mm

Application

3PE 2PE Fbe Anticorrosion Coating

Diameter Range

219-1620mm

Transport Package

Plastic Film and Wooden Pallet

Specification

58-4200mm

Trademark

HSD

Origin

Qingdao

HS Code

8477209000

Production Capacity

15sets/Year

Key features

High-efficiency 38CrMoAlA nitrided screw delivers 30% higher output at same power consumption.

Solid-liquid phase separation screw technology improves plasticization efficiency.

Variable frequency drives on all motors optimize power consumption across production range.

Heat recovery from cooling water system reduces auxiliary energy consumption.

20-30% overall energy reduction compared to standard 3PE coating line configuration.

Company profile

Importers and ExportersFull CustomizationQuality AssuranceR&D Capabilities

Qingdao Huashida Machinery Co., Ltd.

Shandong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 22 years CertifiedNearest Port: Qingdao PortAverage Response Time: ≤4.84h

AI-Powered supplier vetting

SummaryQingdao Huashida Machinery Co., Ltd. is identified as a combined supplier producing mechanical equipment, plastic machinery, general machinery, and plastic products. It reports five production lines, six to ten quality-control staff, stated output of 70 plastic pipe extruder sets and 2,000 tons of heat-shrink sleeve annually, and order fulfillment within 15 working days in both peak and off-peak seasons. The supplier offers extensive customization, ODM services, and OEM services for well-known brands. Its after-sales commitment includes a 12-month installation-based guarantee, troubleshooting, spare parts, and free technical training, followed by lifelong service at the buyer’s expense. Export activity has continued for 21 years, with 51%–70% of sales from exports, primarily to Southeast Asia, the Middle East, and Europe. Evidence also shows valid contracts with associated subcontractors and written service-management procedures. However, no new products were reported in the past year, no SDK is...

Supplier typeThe supplier is classified as a combined company, with business activities covering wholesale of electrical equipment and the production and processing of plastic machinery, general machinery, and plastic products. Its primary offered product is identified as mechanical equipment, and the English company name is Qingdao Huashida Machinery Co., Ltd.

After-Sales capabilityThe supplier commits to a 12-month guarantee from installation, subject to a maximum of 14 months from delivery, with troubleshooting, qualifying spare parts, and free technical training during the warranty period. It also reports written and followed procedures for service-capability assessment and corrective/preventive actions, although the approved-supplier list lacks signatures or dates.

R&D capabilityThe supplier reports ODM capability and broad design-service support, but states that it had no new products in the past year and no available SDK. These facts show design and ODM service capability but do not demonstrate strong recent product innovation.

Production capacityThe supplier operates five production lines, has six to ten quality-control staff, and reports annual output of 70 plastic pipe extruder sets and 2,000 tons of heat-shrink sleeve. It also reports inventory capability, valid manufacturing contracts with associated subcontractors, and fulfillment within 15 working days in both peak and off-peak periods; however, finished-product inspection has instructions but no written records.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. It also provides ODM services, supporting a broad stated ability to adapt products to customer requirements.

Client casesThe supplier reports providing OEM services for well-known brands and has exported for 21 years, with 51%–70% of sales from exports to Southeast Asia, the Middle East, and Europe. These statements indicate international and branded-customer experience, but no specific customer names, projects, or verifiable case details are provided.

Product Q&A

Q:What is the range of pipe diameter the equipment can produce?

Diameter of steel Pipe: 48-219mm, 219-1220mm, 800-1600mm, 1000-2400mm, 58-4200mm

Q:What is the sand blasting grade?

SA2.5

Q:What is your anti-corrosion coating standard?

It can meet SY/T0413-2002, GB/T23257-2009, German DIN 30670, DIN 30678 and coating specification requirements from American Corrosion Association, and DNV. The product pipe fully complies with SY/T0315-2005, CNPC38-2002 Technical specifications for double-layer fusion-bonded epoxy powder coating on buried steel pipe and Canada, American Corrosion Association standards.

Q:What is the delivery time?

2-3 months after deposit.

Q:What is the coating thickness?

80~800um