Which countries or regions do you export to?

Products have been exported to the United States, Brazil, Australia, Russia, the Netherlands, Indonesia, Bangladesh, Iran, India, Saudi Arabia, Mongolia, Japan, and other regions.

What standards does the JFD-2000A comply with?

The detection method, measurement loop, and technical performance parameters comply with the latest GB7354 and IEC-270 'partial discharge measurement' standards.

Jfd-2000A Inexpensive Price China High Quality Portable Partial Discharge Pd Tester

Name: Jfd-2000A Inexpensive Price China High Quality Portable Partial Discharge Pd Tester
Brand: Wuhan UHV Power Technology Co., Ltd.
SKU: 883919595

Hubei, ChinaWuhan UHV Power Technology Co., Ltd.

US$10,000.00-19,000.00

1 Set

Product profile

Measuring Channel

a, B 2 Channels

Measuring Sensitivity

0.1PC

Measuring Frequency Range

3dB Width 10kHz-300kHz

Model NO.

JFD-2000A

Programmable Filter Gears Setting

Low End:10, 20, 40kHz; High End:100, 200, 300 kHz

Gain Dynamic Range

120dB

Sampling Rate

0.1μs/Point for Each Channel

Sampling Accuracy

8 Bit±1/2lsb

Synchronous Frequency

30, 100, 150, 200, 250Hz or Any Hz

Calibration Impulse Generator

Htjf-301

Calibration Impulse Voltage

10V, 5V, 2V, 1V, 0.5V, 0.2V :Six Gears Available

Calibration Capacitor

50PF, 200PF :Two Gears Available

Calibration Impulse Voltage Rise Time

<60ns, Pulse Width>20μs

Calibration Impulse Voltage Fall Time

>100μs

Calibration Phase Angle Range

0-360

Pd Peak Value

0-1000PC

Transport Package

Wooden Case

Specification

CE/ISO

Trademark

HV TEST

Origin

China

HS Code

9030899090

Production Capacity

60 Sets Per Month

Key features

Advanced PD Testing Technology: Developed with latest international tech, featuring high accuracy and digital filtering for superior interference suppression.

Full Auto Calibration & Sync: Features program-controlled automatic calibration, synchronization, voltage recording, and data playback for efficient operation.

Dual-Channel Measurement: Supports A/B 2 channels with digital differential technology to easily analyze partial discharge signal sources.

Intuitive Windows Interface: Uses standard Windows OS with an intuitive panel, allowing inexperienced operators to learn quickly with minimal training.

Comprehensive Data Analysis: Displays PD waveforms in sine map or dot matrix, supporting IEC-270 parameters like discharge repetition rate and current.

Strict Quality Assurance: Uses imported components and undergoes three quality inspections before export, packed in non-fumigation wooden boxes.

Manufacturer Direct Supply: Wuhan Huatian Electric Power Automation CO., LTD. is a manufacturer with 15 years experience and own factory.

Company profile

Cooperated with Fortune 500Experienced TeamPatents AwardedManagement Certification

Wuhan UHV Power Technology Co., Ltd.

Hubei, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 2 Years CertifiedNearest Port: Shanghai Port, Wuhan Port, Shenzhen Port, Ningbo PortAverage Response Time: ≤3.10h

AI-Powered supplier vetting

SummaryThe supplier operates in electrical power facilities and equipment, including electrical instruments, meters, electronic and electromechanical components, repairs, and transformer manufacturing. It reports ISO9001, ISO14001, ISO45001, and CE certifications, with documented corrective-action, complaint-handling, and finished-product inspection procedures. Its innovation and customization capabilities are comparatively strong: it provides ODM, multiple customization options, has introduced new products within the past year, offers an SDK, and provides OEM services for well-known brands. However, the supplier reports no inventory capacity, overseas warehouse, overseas showroom, overseas agents or branches, and no valid contract with associated subcontractors. Export experience is limited to two years, with exports representing 11%–20% of total sales. Financial records are indicated for 2020–2022, but no substantive financial performance details are provided.

Supplier typeThe supplier is a manufacturer and seller in the electrical equipment sector, covering power facilities, electrical instruments and meters, electronic and electromechanical components, repairs, and transformer manufacturing. This supports classification as an electrical equipment manufacturer with related sales and service activities.

CertificationsThe supplier reports ISO9001:2015, ISO14001, and ISO45001:2018 management-system certifications, as well as CE product compliance certification. These explicitly documented certifications indicate coverage of quality, environmental, occupational health and safety, and product compliance requirements.

After-Sales capabilityThe supplier has documented corrective and preventive action procedures and complaint-handling procedures with follow-up records. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and service coverage in zero countries, so the evidence supports process capability but not broad overseas service reach.

R&D capabilityThe supplier reports new products within the past year, provides ODM services, and has an available SDK. It also supports customization from samples and designs, full customization, minor customization, and flexible customization, indicating explicit product-development and technical-support capability.

Production capacityThe supplier identifies transformer manufacturing and other electrical-equipment production activities, uses standardized finished-product inspection instructions, and maintains quality assurance in quality-control processes. However, it reports no inventory capacity and no valid contract between the factory and associated subcontractors, creating limitations in stock availability and documented subcontractor management.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. The same broad service range appears in two slices, providing direct evidence of extensive customization capability.

Client casesThe supplier reports providing OEM services for well-known brands, which is evidence of experience serving recognized-brand customers. No specific customer names, project details, order scope, or performance outcomes are provided, so the depth of customer-case evidence is limited.

Product Q&A

Q:Is the company a manufacturer or trading company?

Wuhan Huatian Electric Power Automation CO., LTD. is an industrial and trade enterprise with its own factory, self-produced and self-sold, founded in 2004 with 15 years of production experience.

Q:Can the product be customized?

Yes, we can make goods to order according to special customer requirements using the latest technology. Customization options include samples, designs, full customization, minor customization, and flexible customization.

Q:What is the delivery time?

The delivery time is usually within 10 working days if there are no accidents. Peak and off-season lead times are within 15 workdays.

Q:Is the quality guaranteed?

Yes, we use imported components in large quantities. Goods undergo three quality inspections before shipment and are uniformly packed in non-fumigation wooden boxes for export.

Q:What are the after-sales terms?

We offer free consulting service, a one-year warranty, and solve after-sales problems timely via email, video calls, or technology door-to-door support.