Jfd-2000A Nuevos Productos Competitive Price Portable Partial Discharge Pd Detector

Name: Jfd-2000A Nuevos Productos Competitive Price Portable Partial Discharge Pd Detector
Brand: Wuhan UHV Power Technology Co., Ltd.
SKU: 883912555

Hubei, ChinaWuhan UHV Power Technology Co., Ltd.

US$10,000.00-19,000.00

1 Set

Product profile

Measuring Channel

a, B 2 Channels

Measuring Sensitivity

0.1PC

Measuring Frequency Range

3dB Width 10kHz-300kHz

Model NO.

JFD-2000A

Programmable Filter Gears Setting

Low End:10, 20, 40kHz; High End:100, 200, 300 kHz

Gain Dynamic Range

120dB

Sampling Rate

0.1μs/Point for Each Channel

Sampling Accuracy

8 Bit±1/2lsb

Synchronous Frequency

30, 100, 150, 200, 250Hz or Any Hz

Calibration Impulse Generator

Htjf-301

Calibration Impulse Voltage

10V, 5V, 2V, 1V, 0.5V, 0.2V :Six Gears Available

Calibration Capacitor

50PF, 200PF :Two Gears Available

Calibration Impulse Voltage Rise Time

<60ns, Pulse Width>20μs

Calibration Impulse Voltage Fall Time

>100μs

Calibration Phase Angle Range

0-360

Pd Peak Value

0-1000PC

Transport Package

Wooden Case

Specification

CE/ISO

Trademark

HV TEST

Origin

China

HS Code

9030899090

Production Capacity

60 Sets Per Month

Key features

Dual-Channel Measurement: Supports A and B 2 channels for simultaneous partial discharge signal analysis.

High Sensitivity Detection: Measuring sensitivity reaches 0.1pC for precise detection of small discharges.

Wide Frequency Range: Operating frequency range spans 10kHz to 300kHz with 3dB width.

Full Auto Calibration: Features programmable filter gears and automatic calibration for accuracy.

IEC and GB Compliance: Complies with IEC-270 and GB7354 standards for partial discharge measurement.

Advanced Data Analysis: Includes digital filtering, interference suppression, and statistical pattern analysis.

Flexible Customization: Offers full, minor, and flexible customization options from samples or designs.

Windows OS Interface: Uses standard Windows OS with intuitive control for quick operator learning.

Company profile

Cooperated with Fortune 500Experienced TeamPatents AwardedManagement Certification

Wuhan UHV Power Technology Co., Ltd.

Hubei, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 2 Years CertifiedNearest Port: Shanghai Port, Wuhan Port, Shenzhen Port, Ningbo PortAverage Response Time: ≤1.99h

AI-Powered supplier vetting

SummaryThe supplier operates in electrical power facilities and equipment, including electrical instruments, meters, electronic and electromechanical components, repairs, and transformer manufacturing. It reports ISO9001, ISO14001, ISO45001, and CE certifications, with documented corrective-action, complaint-handling, and finished-product inspection procedures. Its innovation and customization capabilities are comparatively strong: it provides ODM, multiple customization options, has introduced new products within the past year, offers an SDK, and provides OEM services for well-known brands. However, the supplier reports no inventory capacity, overseas warehouse, overseas showroom, overseas agents or branches, and no valid contract with associated subcontractors. Export experience is limited to two years, with exports representing 11%–20% of total sales. Financial records are indicated for 2020–2022, but no substantive financial performance details are provided.

Supplier typeThe supplier is a manufacturer and seller in the electrical equipment sector, covering power facilities, electrical instruments and meters, electronic and electromechanical components, repairs, and transformer manufacturing. This supports classification as an electrical equipment manufacturer with related sales and service activities.

CertificationsThe supplier reports ISO9001:2015, ISO14001, and ISO45001:2018 management-system certifications, as well as CE product compliance certification. These explicitly documented certifications indicate coverage of quality, environmental, occupational health and safety, and product compliance requirements.

After-Sales capabilityThe supplier has documented corrective and preventive action procedures and complaint-handling procedures with follow-up records. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and service coverage in zero countries, so the evidence supports process capability but not broad overseas service reach.

R&D capabilityThe supplier reports new products within the past year, provides ODM services, and has an available SDK. It also supports customization from samples and designs, full customization, minor customization, and flexible customization, indicating explicit product-development and technical-support capability.

Production capacityThe supplier identifies transformer manufacturing and other electrical-equipment production activities, uses standardized finished-product inspection instructions, and maintains quality assurance in quality-control processes. However, it reports no inventory capacity and no valid contract between the factory and associated subcontractors, creating limitations in stock availability and documented subcontractor management.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. The same broad service range appears in two slices, providing direct evidence of extensive customization capability.

Client casesThe supplier reports providing OEM services for well-known brands, which is evidence of experience serving recognized-brand customers. No specific customer names, project details, order scope, or performance outcomes are provided, so the depth of customer-case evidence is limited.

Product Q&A

Q:Is your company a manufacturer or a trading company?

Wuhan Huatian Electric Power Automation CO., LTD. is an industrial and trade enterprise with its own factory, self-produced and self-sold, founded in 2004 with fifteen years of production experience.

Q:Are the goods in stock and can they be customized?

Goods can be made to order according to special customer requirements using the latest technology. Delivery time is usually within 10 working days if there are no accidents.

Q:Is the product quality guaranteed?

Yes, we use imported components in large quantities. Goods undergo three times of quality inspection before shipment and are uniformly packed in non-fumigation wooden boxes for export.

Q:What are the after-sales terms?

We offer free consulting service, one year warranty, and adopt various methods such as email communication, video calls, and technology door-to-door to solve any after-sales problems timely.

Q:Which countries or regions do you export to?

Products have been successfully exported to the United States, Brazil, Australia, Russia, the Netherlands, Indonesia, Bangladesh, Iran, India, Saudi Arabia, Mongolia, Japan, and other regions.