What is the measuring sensitivity of the JFD-2000A?

The measuring sensitivity is 0.1pC, ensuring high precision for partial discharge detection.

Does the device support automatic calibration?

Yes, the JFD-2000A features full program-controlled automatic calibration, automatic synchronization, and automatic voltage recording.

Jfd-2000A Partial Discharge Detector Pd Tester Partial Discharge Meter

Name: Jfd-2000A Partial Discharge Detector Pd Tester Partial Discharge Meter
Brand: Wuhan UHV Power Technology Co., Ltd.
SKU: 2052592835

Hubei, ChinaWuhan UHV Power Technology Co., Ltd.

US$10,000.00-19,000.00

1 Set

Product profile

After-sales Service

1 Year

Warranty

1 Year

Measuring Channel

a, B 2 Channels

Model NO.

JFD-2000A

Measuring Sensitivity

0.1PC

Measuring Frequency Range

3dB Width 10kHz-300kHz

Programmable Filter Gears Setting

Low End:10,20,40kHz; High End:100,200,300 kHz

Gain Dynamic Range

120dB

Sampling Rate

0.1μs/Point for Each Channel

Sampling Accuracy

8 Bit±1/2lsb

Synchronous Frequency

30,100,150,200,250Hz or Any Hz

Calibration Impulse Generator

Htjf-301

Calibration Impulse Voltage

10V,5V,2V,1V,0.5V,0.2V :Six Gears Available

Calibration Capacitor

50PF,200PF :Two Gears Available

Calibration Impulse Voltage Rise Time

<60ns, Pulse Width>20μs

Calibration Impulse Voltage Fall Time

>100μs

Calibration Phase Angle Range

0-360

Pd Peak Value

0-1000PC

Transport Package

Wooden Case

Specification

CE/ISO

Trademark

UHV

Origin

China

HS Code

9030899090

Production Capacity

60 Sets Per Month

Key features

High Precision Measurement: Measuring sensitivity reaches 0.1pC with 120dB gain dynamic range.

Dual-Channel Analysis: Supports A/B 2 channels for simultaneous measurement and source analysis.

Auto Calibration System: Features full program-controlled automatic calibration and synchronization.

Advanced Display Modes: Offers 2D/3D diagrams, sine maps, and dot matrix PD waveform displays.

Strong Anti-Interference: Utilizes new digital filtering and fenestration technology for noise suppression.

Standard Compliance: Complies with GB7354 and IEC-270 partial discharge measurement standards.

User-Friendly Interface: Runs on Windows OS with intuitive control for quick operator learning.

Customizable Settings: Programmable filter gears and synchronous frequency for flexible testing.

Company profile

Cooperated with Fortune 500Experienced TeamPatents AwardedManagement Certification

Wuhan UHV Power Technology Co., Ltd.

Hubei, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 2 Years CertifiedNearest Port: Shanghai Port, Wuhan Port, Shenzhen Port, Ningbo PortAverage Response Time: ≤1.23h

AI-Powered supplier vetting

SummaryThe supplier operates in electrical power facilities and equipment, including electrical instruments, meters, electronic and electromechanical components, repairs, and transformer manufacturing. It reports ISO9001, ISO14001, ISO45001, and CE certifications, with documented corrective-action, complaint-handling, and finished-product inspection procedures. Its innovation and customization capabilities are comparatively strong: it provides ODM, multiple customization options, has introduced new products within the past year, offers an SDK, and provides OEM services for well-known brands. However, the supplier reports no inventory capacity, overseas warehouse, overseas showroom, overseas agents or branches, and no valid contract with associated subcontractors. Export experience is limited to two years, with exports representing 11%–20% of total sales. Financial records are indicated for 2020–2022, but no substantive financial performance details are provided.

Supplier typeThe supplier is a manufacturer and seller in the electrical equipment sector, covering power facilities, electrical instruments and meters, electronic and electromechanical components, repairs, and transformer manufacturing. This supports classification as an electrical equipment manufacturer with related sales and service activities.

CertificationsThe supplier reports ISO9001:2015, ISO14001, and ISO45001:2018 management-system certifications, as well as CE product compliance certification. These explicitly documented certifications indicate coverage of quality, environmental, occupational health and safety, and product compliance requirements.

After-Sales capabilityThe supplier has documented corrective and preventive action procedures and complaint-handling procedures with follow-up records. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and service coverage in zero countries, so the evidence supports process capability but not broad overseas service reach.

R&D capabilityThe supplier reports new products within the past year, provides ODM services, and has an available SDK. It also supports customization from samples and designs, full customization, minor customization, and flexible customization, indicating explicit product-development and technical-support capability.

Production capacityThe supplier identifies transformer manufacturing and other electrical-equipment production activities, uses standardized finished-product inspection instructions, and maintains quality assurance in quality-control processes. However, it reports no inventory capacity and no valid contract between the factory and associated subcontractors, creating limitations in stock availability and documented subcontractor management.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. The same broad service range appears in two slices, providing direct evidence of extensive customization capability.

Client casesThe supplier reports providing OEM services for well-known brands, which is evidence of experience serving recognized-brand customers. No specific customer names, project details, order scope, or performance outcomes are provided, so the depth of customer-case evidence is limited.

Product Q&A

Q:Is your company a manufacturer or trading company?

Wuhan Huatian Electric Power Automation CO., LTD. is an industrial and trade enterprise with its own factory, self-produced and self-sold. Founded in 2004, we have fifteen years of production experience with reliable production lines, test rooms, and R&D centers.

Q:Can the goods be customized and what is the delivery time?

Yes, goods can be customized according to special customer requirements using the latest technology. The delivery time is usually within 10 working days if there are no accidents.

Q:Is the product quality guaranteed?

Yes, we use imported components in large quantities. After three rounds of quality inspection, the goods are sent out and uniformly packed in non-fumigation wooden boxes for export.

Q:What are the after-sales service terms?

We offer free consulting service, a one-year warranty, and adopt various methods such as email communication, video calls, and on-site technical support to solve any after-sales problems in a timely manner.

Q:Which countries or regions have you exported to?

Products have been successfully exported to the United States, Brazil, Australia, Russia, the Netherlands, Indonesia, Bangladesh, Iran, India, Saudi Arabia, Mongolia, Japan, and other countries. We have cooperative distributors in the US, India, and Vietnam.