Question 1

What fittings does this hose have, and how does the quick connect work?

Accepted Answer

This hose has a 3/8" quick connect male plug on one end and a 3/8" quick connect female coupler on the other - the professional standard. To connect, pull back the spring collar on the coupler, insert the plug, and release; it locks with a click. Connects in under 2 seconds, one-handed, no tools, no cross-threading. The locking collar will not disengage under pressure.

Question 2

Will this hose fit my pressure washer?

Accepted Answer

If your machine has a 3/8" quick connect port (commercial/professional), it fits directly. If it has an M22 14mm threaded outlet (residential gas), use our M22 14mm-to-3/8" QC adapter kit (Version 2). For M22 15mm electric washers, a 15mm-to-14mm conversion is needed. Contact us with your brand and model for a free compatibility check.

Question 3

Does this hose come with M22 adapters?

Accepted Answer

Version 1 is hose only with 3/8" quick connect plug + coupler. Version 2 includes the hose plus a 2-piece brass M22 14mm adapter kit: M22 14mm female to 3/8" QC plug (machine outlet) and M22 14mm male to 3/8" QC coupler (spray gun). Converts standard M22 14mm machines to quick connect. Custom adapter kits available for bulk orders.

Question 4

What is the difference between 3/8" quick connect and M22 threaded fittings?

Accepted Answer

M22 is a threaded fitting requiring screwing by hand or wrench (10-30 sec), prone to cross-threading and worn threads. 3/8" quick connect is a spring-loaded push-to-connect system that locks in under 2 seconds with one hand, no tools, no cross-threading. Quick connect is the standard on all commercial/professional pressure washers, surface cleaners, and trailer systems. Both types interconnect via appropriate adapters.

Question 5

Can I use this hose with hot water?

Accepted Answer

The 3/8" quick connect brass/stainless fittings are fully compatible with hot-water use. Specify temperature rating when ordering; never exceed rated max.

Question 6

Which inner diameter should I choose: 1/4", 5/16", or 3/8"?

Accepted Answer

1/4" (6.4mm): residential electric up to 3200 PSI / 2.5 GPM, lightest, most flexible. 5/16" (7.9mm): mid-range gas 2500-3500 PSI, balanced flow and weight. 3/8" (9.5mm): commercial/industrial 3000-4800+ PSI / 3.0+ GPM, minimal pressure drop, standard for quick connect systems. Match original diameter or upgrade for higher flow.

Question 7

Why is my hose leaking at the quick connect?

Accepted Answer

Check: (1) Incomplete connection - fully insert plug until click, tug to confirm locked. (2) Damaged/missing O-ring on plug tip - replace if cracked or flattened. (3) Dirt/debris in coupler -  flush with clean water. (4) Worn locking balls/collar from heavy use - replace fitting. (5) Wrong size - ensure both ends are genuine 3/8" quick connect.

Question 8

Can I connect two or more hoses together to extend the length?

Accepted Answer

Yes. The plug-to-coupler design allows direct daisy-chaining - insert the male plug of one hose into the female coupler of another, locks automatically. No extra couplers or adapters needed. Chain two 50ft hoses for 100ft, three for 150ft. For combined runs over 100ft, 3/8" ID is recommended to minimize pressure drop. Inspect each joint for leaks before full pressure operation.

Question 9

Is this hose compatible with electric pressure washers?

Accepted Answer

Compatibility depends on fitting, not power source. Most residential electric washers use M22 15mm or proprietary quick connect. For M22 14mm electric outlets, our Version 2 adapter kit works. For M22 15mm electric outlets (some Sun Joe, AR Blue, Campbell Hausfeld), a 15mm-to-14mm conversion adapter is needed. For proprietary systems (some Karcher electric), a brand-specific adapter may be required. Contact us with your model number.

Question 10

What is the maximum working pressure and burst pressure?

Accepted Answer

Working pressure by diameter: 1/4" up to 3600-4000 PSI, 5/16" up to 4000 PSI, 3/8" up to 4800 PSI. All models feature burst pressure up to 16000 PSI - a minimum 4:1 safety ratio, exceeding the industry standard 3:1. 3/8" quick connect fittings match or exceed hose working pressure. Every hose is 100% hydrostatically tested to 1.5x working pressure before shipment.

Question 11

How do I prevent the hose from kinking during use?

Accepted Answer

(1) Always fully uncoil before pressurizing - never operate a coiled or tangled hose. (2) Avoid sharp bends around corners, edges, or under tires. (3) Keep hose as straight as possible between washer and gun. (4) Drain completely and store loosely coiled on a wide-diameter reel; do not hang from a single point. (5) If kinking occurs, release trigger pressure immediately and straighten before resuming.

Question 12

Can I use this pressure washer hose as a regular garden hose?

Accepted Answer

No. Pressure washer hoses are designed exclusively for high-pressure cleaning systems (1000+ PSI) between the washer outlet and spray gun. They are NOT for garden faucets or low-pressure supplies. The 3/8" quick connect fittings are physically incompatible with standard 3/4" GHT garden hose threads. Use a standard 5/8" or 3/4" garden hose for the water supply (inlet) side, and our high-pressure hose only on the outlet side.

Question 13

What is the minimum order quantity (MOQ) for wholesale / bulk orders?

Accepted Answer

Standard MOQ is 100 pieces per specification (diameter x length x fitting). For mixed-spec orders within a single 20ft/40ft container, MOQ per SKU may reduce to 50 pieces. Sample orders of 1-10 pieces available for quality evaluation, deductible from first bulk order. Private-label, custom-color, or custom-adapter orders: MOQ 500 pieces per design. Contact us for a detailed FOB/CIF quotation.

Question 14

Can you customize the hose length, color, fittings, adapters, and branding?

Accepted Answer

Yes, full customization as a direct manufacturer: Length 25-300ft (7.5-90m). Colors: black, grey, yellow, green, blue, red, or custom Pantone (MOQ 500pcs). Fittings: 3/8" QC plug + coupler in brass or stainless steel, optional swivel. Adapter kits: M22 14mm, M22 15mm conversion, 1/4" QC, or custom multi-piece kits. Branding: logo printing, custom hang tags, retail packaging (polybag, color box, blister). Lead time 15-25 working days.

Question 15

What quality certifications and testing do your hoses and fittings undergo?

Accepted Answer

ISO 9001:2015 certified; CE & RoHS compliant. QC: (1) Raw material inspection - hardness, tensile, dimensions. (2) In-process SPC - extrusion diameter, braid coverage, crimp. (3) 100% hydrostatic test - 1.5x working pressure, 30+ sec, zero leakage. (4) Fitting testing - pull-off, 1000+ cycles, salt-spray. (5) Sampling burst testing. (6) SGS/BV/Intertek inspection on request. Full COC with every shipment.

Product specifications

Inner Diameter

Fittings

Length

Product profile

Customization

Type

Feature

Model NO.

Certification

Condition

Customized

Product Name

Inner Diameter

Hose Length

Working Pressure

Burst Pressure

Inner Tube Material

Reinforcement

Outer Cover

Fitting Configuration

Fitting Material

Water Temperature

Minimum Bend Radius

Color Options

Application

Transport Package

Specification

Trademark

Origin

HS Code

Production Capacity

Key features

Company profile

About Our Factory & Business Background

Our Production Capability & Technical Expertise

Our Industry Experience & Global Business Record

Product Q&A

Send Inquiry

You may also like