1080P Dashcam Night Vision DMS Adas Camera for Cars Vehicles Windshield

Emergency video recording is enabled by default. If the dash cam detects any collisions, it will automatically record an emergency video. Also the recording process cannot be interrupted. Once the emergency recording is completed, the dash cam will automatically switch back to normal video recording mode.

If the dash cam automatically stops recording, please use the following to solve the problem, 1) Restoring dashcam to factory settings 2) Formatting the internal memory card 3) Updating firmware 4) Detecting abnormality in the internal memory card (e.g., non-dash cam-related files). In this case, please format the internal memory card. After exiting these operations, the dash cam will automatically resume recording.

1) The positioning system on the dashcam is not functioning and cannot obtain positioning information. Solution: Check the dashcam's GPS light. If it is not lit, move the dash cam to an open space and wait for approximately 3 minutes before trying again. 2) The car did not move, hence no driving record data was generated. Solution: Ensure that the dashcam is correctly installed in the car and operating normally. Drive the car a certain distance to generate driving record data. 3) The phone has n

1) The dashcam's camera is not positioned correctly, too far from the center front, i.e. too close to the left and right sides or the upper and lower sides. 2) The nighttime light is too dim, making it difficult to identify the lane line accurately. 3) The lane line appears blurred, making it impossible to identify.