PP Compression Female Elbow HDPE Pipe Fitting 63mm X 2 Inch with Reinforcing Ring for PE Pipe Water Supply

Select by actual PE pipe outside diameter. PE connection sizes are 20, 25, 32, 40, 50, 63, 75, 90 and 110 mm. The inch value identifies the threaded outlet, not the pipe outside diameter. Choose the exact mm x inch combination listed in the size options; not every pipe diameter has every thread size.

At 20 C, the catalogue rating is PN16 for 20-63 mm PE pipe sizes and PN10 for 75-110 mm sizes. Do not assume these ratings apply at higher temperatures. Send the operating temperature, pressure and medium for selection.

This model has a PE compression connection and a BSPT female threaded connection. Match both the pipe outside diameter and mating thread size. BSPT and NPT must not be treated as interchangeable. The 304 stainless steel ring supports the female threaded outlet; use the listed pressure rating for the selected size.

The compression nut activates the grip ring and sealing element, without heat fusion equipment or solvent cement at the PE compression end. Request the model-specific assembly instructions before installation. Threaded joints must be assembled to the specified thread standard.

The body is 100% virgin PP. NBR is the standard seal for applicable configurations; EPDM is available where specified. Tell us the fluid and temperature so the seal option can be confirmed for your order.