Forced Air Convection Lab Oven

Please consider your test sample (metals, coatings, rubber, plastics, electronic components, etc.) and the environmental conditions you need to simulate (salt spray, UV light, dust, rain, ozone, etc.). Provide us with your sample details and applicable test standards (e.g., GB/T, ASTM, ISO), and our technical team will recommend the most suitable model and size for you.

Inspect the packaging and unit in the presence of the carrier. If damage is found, take photos immediately, note it clearly on the delivery receipt, and contact our after-sales team.

Typically, 50% deposit upon signing the contract and the balance before shipment. For long-term or repeat clients, more flexible terms can be negotiated. The final payment schedule is defined in the contract.

1.Remove all contents, unplug the unit, and clean both inside and outside. 2.Place a strip of paper between the door seal and the frame to prevent sticking (apply talcum powder for long-term storage); 3. Store in a dry, ventilated area away from direct sunlight.