2 Inch Digital Flow Meter 4-20mA Pulse RS485 Turbine Flowmeter Water Flow Sensor Fuel Diesel Flow Meter

These sensors are ideal for measuring low-viscosity, clean liquids in closed pipes, such as tap water, diesel, gasoline, and light oils. The medium must be free of fibers and particles

Our standard accuracy is 0.5% R/1% R, Combined with a repeatability of 0.15% to 0.03%, these meters provide consistent data for quantitative control and energy-saving audits.

Yes. Both series offer an Explosion-proof version (ExdIICT6 Gb), suitable for environments with explosion hazards. For outdoor use, the turbine flow sensor features an IP65 or IP68 protection level, that supports an IP68 waterproof rating for submerged or rainy conditions.

We provide a comprehensive range of outputs: 3-wire Pulse, 4-20mA Signal, and 0-10V/0-5V Voltage. For digital systems, flow meter also supports RS485 (Modbus RTU). The intelligent converter uses an ARM Cortex-M3 32-bit RISC core for rapid data processing and stable transmission.

Our standard models cover DN4 to DN200. Standard pressure is usually up to 1.6MPa or 4.0MPa depending on the size, but we can customize High-Pressure versions supporting up to 42MPa. Connection methods include Male/Female Thread, Flange (ANSI/DIN/JIS), Clamp-on, and Sanitary Tri-clamp.