600 Electromagnetic Single Wok & Single Large Pot Stove

It defaults to 380V three-phase five-wire power supply, and can also be customized to 220V single-phase power supply according to needs; wiring must be operated by a professional electrician, strictly in accordance with the marks on the body terminal block (L1, L2, L3 connected to phase lines, N connected to neutral line, PE connected to ground wire) to ensure reliable grounding and avoid leakage hazards. The power cord specification must match the power: 10KW-20KW requires YZW type general rubb

The product radiation is far lower than the national safety standard, and the radiation is mainly concentrated within 10 centimeters of the bottom of the pot. Beyond this range, the radiation will attenuate rapidly, which is even smaller than the radiation of mobile phones used daily. Normal operation and use are harmless to the human body.

No electric leakage will occur. The product adopts electromagnetic induction heating, and the pot has no physical contact with the power supply. It is also equipped with a professional leakage protection switch and a fully sealed insulated chassis. The double protection effectively eliminates the risk of electric leakage and makes use more secure.

Magnetic conductive pots (such as iron pots, stainless steel pots) are required. The diameter of the pot bottom must match the heating area of the stove surface (it is recommended to be no less than 40cm), and the bottom must be flat and free of deformation; ordinary non-magnetic conductive pots such as aluminum pots, copper pots and ceramic pots cannot be heated normally and are not recommended for use.

The whole machine is guaranteed for 1 year, and the movement (including IGBT module) is guaranteed for 2 years; the product adopts industrial-grade core components, the body has no vibration, and the heating coil does not generate heat. Under normal use, the service life can reach about 10 years.