Used 1450mm Metal Sheet Hot DIP Galvanizing Production Line

Name: Used 1450mm Metal Sheet Hot DIP Galvanizing Production Line
Brand: Shandong Longchengda Electromechanical Equipment Sales Co., Ltd
SKU: 2152410772

Shandong, ChinaShandong Longchengda Electromechanical Equipment Sales Co., Ltd

US$100,000.00-1,000,000.00

1 Set

Product profile

Customization

Available

Production Scope

Product Line

Condition

Used

Model NO.

1450 Metal Sheet Galvanizing Line

Automation

Automatic

After-sales Service

Overseas Third-Party Support Available

Processing Thickness

0.2-1.0 mm

Processing Width

700-1300 mm

Speed

200 M/Min

Transport Package

Seaworthy Split Steel Frame Fixed Packing

Specification

Complete 1450 galvanizing line for metal sheets

Trademark

Beijing Metallurgical Jingcheng

Origin

Beijing Metallurgical Jingcheng

Key features

This 1450mm continuous hot dip galvanizing line is special supporting post-processing equipment for cold rolled steel sheet. It is designed for continuous galvanizing treatment on carbon steel sheets,

Applicable strip width: Max 1450mm; Suitable sheet thickness: 0.3~3.0mm; Adopts full PLC automatic control, stable running speed, even zinc layer thickness, low zinc consumption and high finished prod

The whole production line has been fully overhauled, inspected and trial operated before delivery. We provide split seaworthy steel frame moisture-proof packaging, overseas on-site installation & comm

Company profile

Importers and ExportersFast DeliveryR&D CapabilitiesCustomization from Designs

Shandong Longchengda Electromechanical Equipment Sales Co., Ltd

Shandong, China

CertifiedBusiness Type: Trading Company CertifiedExport Year: Less than 1 year CertifiedNearest Port: Qingdao PortAverage Response Time: ≤2.75h CertifiedTerms of Payment: T/T, LC, D/P CertifiedInternational Commercial Terms(Incoterms): EXW, CFR, CIF, FOB

AI-Powered supplier vetting

SummaryThe supplier is identified as a professional technical equipment supplier offering equipment selection, installation, maintenance, training, and design-based customization. It reports product-specific annual output, one R&D engineer, and a technical after-sales network, but lacks 3D design, ODM, SDK, and brand OEM services. Service governance is weak: no documented procedures, approved supplier list, corrective-action records, or complaint-handling records are reported. The supplier has no stated inventory, overseas warehouse, showroom, agent, or branch service capability, and offers no overseas-service coverage in the provided data. Production quantities are reported, while quality assurance, traceability, and test-equipment status are either unknown or show zero test equipment. Financial records are referenced for multiple years, but the slices do not provide sufficient evidence to assess financial strength. No customer cases or certifications are provided.

Supplier typeThe supplier explicitly identifies itself as a professional technical supplier and provides industrial equipment-related services, including selection, installation, maintenance, training, and customization from designs. Its listed products include rolling mills, foil mills, slitting-line equipment, and roll-repair grinders.

After-Sales capabilityThe supplier states that it has responsive after-sales support and provides maintenance and technical training, but it reports no overseas warehouse, showroom, agent, or branch and zero countries offering overseas services. Service management is not formally documented: no procedures or records are reported for supplier assessment, corrective actions, or complaint handling; quality assurance and traceability are also unknown, with zero quality-control test equipment reported.

R&D capabilityThe supplier is classified as a professional technical supplier and has one R&D engineer whose stated responsibility is customer technical service. However, it reports no new products in the past year, no 3D software design, no ODM, no SDK, and no brand OEM capability, indicating limited documented innovation breadth.

Production capacityThe supplier reports annual quantities for several equipment categories, including 5 steel mill rolling lines, 10 foil mills, 8 reversible cold rolling mills, 2 companion welders, and 6 roll-repair grinders. These stated product-level outputs provide explicit evidence of production capability, although the slices do not establish capacity utilization, manufacturing controls, or verified quality performance.

Customization capabilityThe supplier explicitly offers customization from customer designs, and this capability is repeated in both its R&D and annual productivity information. No 3D software design service is provided, so customization is supported when a design is supplied rather than through documented independent 3D design services.

Product Q&A

Q:What types of second-hand machinery do you supply?

We specialize in supplying a full range of second-hand aluminum processing machinery and related equipment, including but not limited to Aluminum Foil Rolling Mills, Cold Rolling Mills, Roll Grinding Machines, Tension Levelers, Aluminum Plate Annealing Furnaces, Bell-type All-Hydrogen Annealing Furnaces, Slitting Machines, Twin-Roll Casters, 5-stand Tandem Rolling Mills and Mill Housings. All equipment is carefully selected from well-known manufacturers with reliable performance.

Q:Are your second-hand machines inspected and tested before sale?

Yes, every piece of second-hand machinery undergoes a strict multi-step inspection and performance test before being put on sale. Our professional technical team will check the core components (such as rolls, motors, control systems), detect potential faults, and conduct trial operation to ensure the machine can work normally and meet the basic production needs of customers. We also provide a detailed inspection report for each machine.

Q:What is the purchasing process for second-hand machinery?

The purchasing process is simple and transparent: 1. Consult our sales team to confirm the model, specifications, condition and price of the required machinery; 2. We provide detailed machine photos, videos, inspection reports and other materials for your reference; 3. Sign a formal purchase contract after both parties confirm the details; 4. Pay the down payment as agreed in the contract; 5. We arrange equipment cleaning, maintenance and packaging; 6. After the balance is paid, we arrange deliv

Q:Can I visit your warehouse to inspect the machinery in person?

Yes, we warmly welcome customers to visit our warehouse and inspection workshop in person to check the condition of the machinery. We will arrange a professional technical guide to accompany you, introduce the machine performance, demonstrate the operation, and answer any questions you may have on site. Please contact us in advance to make an appointment.