Tungsten Electrode Aviation Rod Machine TIG Welding with Good Service Wt, Wl

For tungsten wire, the diameter is from 0.008mm~3.2mm. For tungsten rod, the diameter is from 2mm~100mm, length is from 50mm~2000mm. For tungsten sheet, the thickness is from 0.05mm~2mm, the width is from 50mm~600mm, the max length is 600mm. For tungsten plate, the thickness is from 2.1~25mm, the width is from 30mm~600mm, the max length is 600mm. For tungsten boat, the thickness is from 0.2mm~0.5nn, the width is from 5mm~25mm, the max length is 100mm. For tungsten tube, the diameter is from 25mm

For tungsten wire, we have graphite black surface, alkali cleaning surface, electric polished surface. For tungsten rod, we have balck surface and polished surface. For tungsten sheet, we have alkali cleaning surface and bright surface. For tungsten plate, we have polished surface. For tungsten boat, we have alkali cleaning surface. Foe tungsten tube, we have machined surface. For tungsten crucible, we have machined surface.

Normally, pure tungsten products can be used in the high temperature vacuum environment, so that they can exert their superior high temperature performance. If it is used in air condition under the high temperature of over 400 degrees, tungsten will react with oxygen and produce WO2. Because the melting point of tungsten is 3410 degrees, it can withstand up to 3300 degrees. But its normal working temperature is 1800~2600 degrees.

We can achieve the thinnest thickness of 0.025mm, and only a few factories in China can achieve this thickness.

(1)High density: 17-18.5g/cc; (2) High hardness and high strength; (3) High thermal conductivity and low coefficient of thermal expansion; (4) Good electrical and thermal conductivity; (5) Excellent machining performance; (6) Absorption capacity for X-rays and gamma rays; (7) For W-Ni-Cu tungsten heavy alloy, it is non-magnetic.