High Density Spc Flooring for Interior Floor Use

1. Lay a sound-absorbing underlayment/moisture-proof membrane.

2. Lay the first row of floorboards (critical benchmark row).

3. Align the latch of the second floorboard with the latch of the first floorboard, insert it at a 30angle, and then gently press down until fully engaged. Gently tap the joint with a rubber mallet

4. Use a staggered joint method (the distance between the joints of adjacent rows of floorboards should be 30cm) to avoid continuous joints affecting structural stability.

5. When splicing, first align and engage the short-side latches of the floorboards, then insert the long-side latches at an angle and press down. Gently tap with a rubber mallet throughout the process

6. Install edging and baseboards. After all floorboards are laid, remove the wooden wedges along the walls and install edging strips (thresholds, doorways) and baseboards.