High-Power 2000W 12V to 110V DC to AC Inverter

Our high-quality power inverters are highly efficient. Pure sine wave inverters utilize high-efficiency transformer isolation, resulting in high overall inverter efficiency and low no-load losses. Efficiency can reach over 90%, with some even reaching around 95%.

There are two main types: pure sine wave and modified sine wave. The waveform output by a pure sine wave inverter is essentially the same as the mains sine wave, offering greater load efficiency and capacity. It can operate inductive loads and any other common AC loads, including refrigerators, televisions, and radios, without interference or noise, and without affecting the performance and lifespan of the load equipment. The waveform output by a modified sine wave inverter is closer to a sine w

This could be due to a problem with the input power connection, such as a loose or poorly connected input power cord, or an internal short circuit in the power cord. It could also be caused by a blown fuse. When an abnormal condition such as a short circuit or overload occurs within the inverter, the fuse will quickly blow, shutting off the circuit. Additionally, a switch failure or internal circuit malfunction can also cause the inverter to lose output.

If the cause is large input voltage fluctuations, check the input power supply. If the battery is low, recharge or replace it. If using a rectified DC power supply from AC mains, install a voltage stabilizer on the input side. If the load fluctuates frequently and exceeds the rated output power, avoid running too many high-power devices simultaneously and ensure that the total power of the loads connected to the inverter does not exceed its rated output power. If the inverter's internal voltage

Most Chinese manufacturers offer customization services. You can specify your specific requirements, such as input and output voltage, power, waveform type, size, and special features, and we will design and produce according to your requirements.