Powered by Made-in-China.com
Fine Ground Tungsten Carbide Die and Special Shaped Mould for Small Alloy Component Forming
US$100.00-500.00
1 Set
Product profile
Customization
AvailableApplication
Car, Household Appliances, Hardware, Commodity, Home Use, Electronic, Powder Metallurgy, Powder MetallurgyProduct Material
Tungsten CarbideModel NO.
Special-shaped Carbide MoldCavity
Multi-cavityCustomized
CustomizedMaterial
Hard Alloy and Steel Bonded CarbideTechnics
Forming DieProcess Combination
Single-Process MouldManufacturing Technology
Automation TechnologyMold Cavity Technology
EDM MillingMilling Speed
Normal SpeedParts Detection Method
Measurement of Three Axis NcProcessing Method
Powder CompactionOrigin
ChinaKey features
Multi-piece simultaneous pressing in one mold for higher output
Separated punch design; worn individual punch can be replaced alone to avoid whole mold scrap
Molding without parting lines to deliver better appearance of finished rods
Tool steel body with carbide insert for middle die; full carbide working surface on punches
Perfect for high-value products, cutting material waste and expenses of follow-up machining
Customizable shapes including stepped, straight and ultra-thin types, perfectly matching different production equipment
Repeated regrinding is available after inner wall wear, greatly reducing long-term mold replacement cost
Multi-Cavity Design: Optimized for vertical rod compression electric press efficiency.
Diverse Material Options: Available in various grades including K35, K10, YL10.2, YG8, YG15, YG20, MD40A, and MD40C.
Extensive Experience: Nearly 20 years of growth with over 100 domestic tungsten carbide manufacturer collaborations.
Company profile
CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 5 years CertifiedNearest Port: Shenzhen PortAverage Response Time: ≤0.05h
About Our Factory & Business Background
AddressDongguan, Guangdong, China
Plant Area6100 square meters
Number of Employees31
Registered Capital2,000,000 RMB
Terms of PaymentT/T
International Commercial Terms(Incoterms)FOB, EXW, CIF, CFR
Average Lead TimePeak Season Lead Time: one month Off Season Lead Time: within 15 workdays
Minimum Order Quantity1 set
Supply Chain Partners16
Our Production Capability & Technical Expertise
Main ProductsCarbide Die, Powder Metallurgy Mold, Cemented Carbide Mold, Mold Accessories
Production Lines5
Production MachinesCNC Lathe, Lathe, Milling Facility, CNC Machining Center, CNC Grinding Facility, EDM Facility, Slow Wire Cutting Facility, Fast Wire Cutting Facility, Surface Grinding Facility, Water Grinding Facility, Polishing Facility, Jet Polishing Facility
QA/QC inspectors2 people
Inspection Type for Finished Products100% inspection(Visual inspection & Function inspection)
Inspection Method for Finished ProductsHave instructions and uniformly followed
R&D Engineers3 people
Traceability of Raw MaterialsYes
Our Industry Experience & Global Business Record
Year of Establishment2021-01-28
Main MarketsDomestic
Repeat Buyers Choice80%~100%
Number of Foreign Trading Staff3
Overseas Agent/BranchNo
New Products Launched in Last yearYes
Our Certifications, Standards & Industry Recognition
Cooperated with Fortune 500No
Product Q&A
Q:What Are The Core Advantages Of Cemented Carbide Dies Compared With Cr12MoV Mold Steel?
A:
Its Wear Resistance Is Over 10 Times That Of Cr12MoV Mold Steel With Longer Service Life. It Features Stable Dimensions Without Deformation Under High Temperature And Pressure, High Surface Finish, Burr-Free Pressed Parts And Low Powder Adhesion.
Q:Are Custom Processing Services Available For Thin-Wall, Multi-Step And Irregular Special-Shaped Cavities?
A:
All Kinds Of Complex Non-Standard Special-Shaped Structures Are Supported. Thin-Wall, Deep-Cavity, Multi-Step And Eccentric Special-Shaped Dies Can Be Designed With Inlaid Structure To Effectively Solve The Problem Of Thin Edge Chipping.
Q:What Documents Are Required For Custom Dies? Can Molds Be Developed With Only Samples Without Drawings?
A:
You Can Provide 2D Engineering Drawings, 3D Models Or Physical Samples. We Can Carry Out Reverse Mapping And Modeling After Receiving Samples To Complete The Development Of Complete Sets Of Special-Shaped Molds.
Q:Can Small Sample Dies Be Customized? What Are The Respective Delivery Cycles For Sample Dies And Mass-Production Dies?
A:
Customization Of Small-Batch Sample Molds Is Supported With Priority Production Arrangement For Sample Orders. The Delivery Time Of Conventional Sample Molds Is 15-18 Working Days, And That Of Mass-Production Molds Is 25-30 Working Days.
Q:What Inspection Items Will The Dies Undergo Before Delivery? Can Inspection Reports Be Provided?
A:
All Molds Undergo Full-Dimension Inspection By Zeiss CMM, Roughness Test And Hardness Test Before Delivery. Complete Paper And Electronic Dimensional Inspection Reports Are Attached To Each Set Of Molds.
Send Inquiry
*To:
Dongguan Hongming Precision Mold Co., Ltd.
Dongguan Hongming Precision Mold Co., Ltd.*Content:
Supplier replies will be sent to your registered email
You may also like
Long Service Tungsten Carbide Die and Special Shaped Mould for Ceramic Compaction Process
US$100.00-500.00
1 Set(MOQ)
High Quality Flat Screw Heading Die Tungsten Carbide Moulds
US$30.00-100.00
1 Piece(MOQ)
High Precision Tungsten Carbide Die and Special Shaped Mould for Powder Metallurgy Parts
US$100.00-500.00
1 Set(MOQ)
Fastening Hinge Press Die and Hinge Gate Stamping Mold/Tool/Mould
US$30.00-100.00
1 Piece(MOQ)
High Precision BMC Manhole Cover Mold, Customizable for Square/Round/Shaped Composite Covers
US$9,000.00-11,000.00
1 Set(MOQ)
Drone Mould for Accurate Engineering and Design Solutions
US$8,000.00
1 Set(MOQ)
Engineering Truck Special SMC Access Step Mould Integrated Hot Press Forming Die
US$19,500.00-20,000.00
1 Set(MOQ)
Premium Carbon Fiber Moulds for Aerospace Applications and Innovations
US$19,000.00
1 Set(MOQ)
Hot Selling Press Brake Mold for Bending Mild Steel Sheet, Press Brake Die, Wila, Amada
US$500.00-1,000.00
1 Set(MOQ)
Low Warpage LFT Press Mould for Industrial Pallet and Construction Formwork Making
US$10,000.00-18,888.00
1 Set(MOQ)
Durable SMC Mould for Custom Box Production and Crafting
US$12,000.00
1 Set(MOQ)
SMC Press Molding Die for Trailer Wind Deflector Fiberglass Component Plastic Mould
US$1,500.00-30,000.00
1 Set(MOQ)
Precision Drone Moulds for Engineering and Design Excellence
US$8,000.00
1 Set(MOQ)
Steel Compression SMC BMC Mold for Car Auto Parts Efficient Production
US$7,500.00-16,000.00
1 Set(MOQ)
SMC Mould for Back and Front Parts
US$30,000.00-80,000.00
1 Piece(MOQ)
Custom Molding Die for SUV Anti-Collision SMC Bumper Parts Mould Plastic
US$5,000.00-9,888.00
1 Set(MOQ)
Plastic Injection Mould Manufacturer for PP/PE Compression Pipe Fittings Mould
Negotiable
1 set(MOQ)