Powered by Made-in-China.com
Cheap DC AC Servo Gear Motor for Motion Control and Cost-Effective Automation
US$100.00-2,000.00
1 Piece
Product profile
Customization
AvailableApplication
IndustrialSpeed
Variable SpeedModel NO.
zpservo motor8Number of Stator
Three-PhaseFunction
Driving, ControlCasing Protection
Closed TypeNumber of Poles
2Starting Mode
Variable Frequency StartingCertification
ISO9001, CCCBrand
otherTransport Package
CartonSpecification
unitTrademark
otherOrigin
ChinaHS Code
8501520000Production Capacity
1000/YearKey features
Wide Power Range: Power output typically ranges from 50W to 3kW for diverse automation needs.
High Torque Output: Rated torque up to 14.3 Nm with peak capabilities exceeding standard limits.
IP65 Protection Rating: Dust and water resistant design suitable for demanding industrial environments.
High Precision Control: Closed-loop systems with high-resolution encoders ensure accurate positioning.
Flexible Customization: Offers full customization, minor customization, and customization from samples or designs.
Low Cogging Torque: Advanced magnetic designs ensure smooth operation and reduced vibration.
Long Service Life: Brushless AC variants offer over 50,000 hours MTBF with minimal maintenance.
High Efficiency: Designed to minimize energy consumption and heat generation during operation.
Company profile
CertifiedBusiness Type: Trading Company CertifiedR&D Capacity: ODM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 3 years CertifiedNearest Port: Tianjin PortAverage Response Time: ≤4.65h
AI-Powered supplier vetting
SummaryThe supplier is identified as a professional technical supplier providing 3D software design, ODM, industrial automation, product sales, installation, commissioning, maintenance, and repair services. It supports extensive customization and has documented finished-product inspection instructions, quality assurance, and stated lead times within 15 working days in both peak and off-peak seasons. However, it has no overseas showrooms, agents, branches, or offline trade-show experience, and no new products were developed in the past year. Supplier-management, corrective-action, and complaint-handling procedures exist but lack written records. Certification is listed as NIL, quality-control staffing is below five, and R&D engineer experience totals two years. Export activity is established, with 31%–40% of sales from exports and three years of export experience. Evidence of specific customer cases is not provided.
Supplier typeThe supplier explicitly identifies itself as a professional technical supplier and provides industrial automation-related one-stop services, including product sales, solutions, installation and commissioning, maintenance, and repair. Its stated focus covers cement, packaging, printing, rubber, textile, and machine-tool industries.
CertificationsSupplier management system certification is explicitly recorded as NIL. The provided information therefore does not demonstrate possession of relevant certifications.
After-Sales capabilityThe supplier states that it provides installation, commissioning, maintenance, and repair services and has a quality-assurance system. However, it has no overseas showroom, agent, or branch, and its complaint-handling procedure has no written records, limiting evidence of formalized after-sales execution.
Production capacityThe supplier reports lead times within 15 working days during both peak and off-peak periods, maintains written and uniformly followed finished-product inspection instructions, and lists annual production output above the stated threshold. Nevertheless, quality-control staffing is below five and the service-capability assessment procedure has no records.
Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. The same capability is confirmed in two slices, providing direct evidence of broad customization coverage.
Product Q&A
Q:What is the typical power range for these DC/AC servo gear motors?
A:
These motors generally range from 50W to 3kW, catering to a wide spectrum of automation needs.
Q:How does the gearbox in a servo gear motor affect its performance?
A:
The gearbox multiplies the motor's torque, allowing it to handle heavier loads at lower speeds while maintaining precise motion control through the servo's feedback system.
Q:Are these servo gear motors suitable for harsh industrial environments?
A:
Many models feature IP65 ratings, providing protection against dust and water, making them suitable for demanding industrial settings.
Q:What is the expected lifespan of a brushless AC servo gear motor?
A:
Brushless AC servo motors offer long, reliable service life with minimal maintenance due to the absence of brushes, often exceeding 50,000 hours MTBF (Mean Time Between Failures) in optimal conditions.
Q:How important is encoder resolution for servo gear motor applications?
A:
High-resolution encoders (e.g., 2500 PPR or higher) are critical for achieving precise position control, enabling accurate repeatability and smooth motion in demanding applications.
Send Inquiry
*To:
Beijing Zhongping Technology Co., Ltd.
Beijing Zhongping Technology Co., Ltd.*Content:
Supplier replies will be sent to your registered email
You may also like
Factory Direct Sales 220V, 4nm, 800W AC Servo Motor CNC Servo Motor and Driver for Engraving Machine
US$188.00-399.00
1 Set(MOQ)
Szgh 1kw AC Servo Motor 380VAC Driver 23bit Absolute Encoder Servo Motor and Driver for Sewing Machine
US$93.00-106.00
1 Piece(MOQ)
High-Performance AC/DC Servo Motor for Robotics and Home Devices
US$10.00-150.00
10 Pieces(MOQ)
Advanced Synchronous AC Servo Motor and Driver for Robotics
US$66.00-321.00
2 pieces(MOQ)
High Torquo Ailored AC Gear Motor with Brake Ideal for OEM and ODM Projects
US$80.00-260.00
1 Piece(MOQ)
Jt/Jianteng AC Motor Speed Control Motor Electric Motor Gear Motor and DC Motor
US$25.00-50.00
1 Piece(MOQ)
Sunflow Yzf34-45-18 AC Shaded Pole Motor 34W for Freezer and Refrigerator Gear Motor
US$7.00-9.00
200 Pieces(MOQ)
Gpg Single Phase High Precision Micro AC Geared Reduction Motor 5rk40gn for Motion Control Industry
US$20.00-100.00
1 Piece(MOQ)
High-Performance AC/DC Servo Motor for Appliances and Robotics
US$35.00-150.00
10 Pieces(MOQ)
AC Servo Motors and AC Servo Drive Packages for CNC Milling Machine
US$66.00-321.00
2 pieces(MOQ)
AC Servo Linear Actuator Motors for Motion Platform
US$290.00
2 Pieces(MOQ)
220V 2.39N.m 3000rpm 0.75KW Single or three Phase AC Servo Motor and Driver for CNC Machine SZGH-08075DC
US$215.00-219.00
1 Piece(MOQ)
AC Servo Motor and Driver Kit for CNC Milling Machine
US$195.00-255.00
2 pieces(MOQ)
Universal AC Gear Motor - Perfect for Household and Industrial Use
US$20.00-50.00
1 Piece(MOQ)