Powered by Made-in-China.com
DELTA DRS50L6SO1BN002 Dual-Arm 4-Axis SCARA Robot 6kg/±0.015mm for Double-Sided Assembly & Simultaneous Sorting
US$211.05
1 Piece
Product profile
Customization
AvailableApplication
Aerospace Industry, Automotive Industry, Electronics Industry, Food Industry, Metal Fabrication Industry, Pharmaceutical Industry, Plastic IndustryControl Mode
Point to Point ControlModel NO.
DRS50L6SO1BN002Degrees of Freedom
Robot Spare PartsDrive Mode
ElectricType
Articulated RobotTransport Package
CartonSpecification
oneTrademark
oneOrigin
BrazilHS Code
84249080Production Capacity
1000/YearKey features
Dual-Arm Configuration: Enables parallel processing for double-sided assembly and simultaneous sorting, significantly boosting throughput.
High Payload Capacity: Supports 6kg payload per arm, allowing manipulation of substantial components efficiently.
Fast Operation Speed: Maximum speed reaches 1200mm/s for rapid material handling and reduced cycle times.
Exceptional Durability: Mean Time Between Failures (MTBF) exceeds 50,000 hours under typical operating conditions.
ISO 13849 Safety Compliance: Integrated safety system includes emergency stops and safety zones compliant with international standards.
Flexible Customization Options: Supports full customization, minor customization, and flexible customization from samples or designs.
Company profile
CertifiedBusiness Type: Trading Company CertifiedR&D Capacity: ODM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 3 years CertifiedNearest Port: Tianjin PortAverage Response Time: ≤3.01h
AI-Powered supplier vetting
SummaryThe supplier is identified as a professional technical supplier providing 3D software design, ODM, industrial automation, product sales, installation, commissioning, maintenance, and repair services. It supports extensive customization and has documented finished-product inspection instructions, quality assurance, and stated lead times within 15 working days in both peak and off-peak seasons. However, it has no overseas showrooms, agents, branches, or offline trade-show experience, and no new products were developed in the past year. Supplier-management, corrective-action, and complaint-handling procedures exist but lack written records. Certification is listed as NIL, quality-control staffing is below five, and R&D engineer experience totals two years. Export activity is established, with 31%–40% of sales from exports and three years of export experience. Evidence of specific customer cases is not provided.
Supplier typeThe supplier explicitly identifies itself as a professional technical supplier and provides industrial automation-related one-stop services, including product sales, solutions, installation and commissioning, maintenance, and repair. Its stated focus covers cement, packaging, printing, rubber, textile, and machine-tool industries.
CertificationsSupplier management system certification is explicitly recorded as NIL. The provided information therefore does not demonstrate possession of relevant certifications.
After-Sales capabilityThe supplier states that it provides installation, commissioning, maintenance, and repair services and has a quality-assurance system. However, it has no overseas showroom, agent, or branch, and its complaint-handling procedure has no written records, limiting evidence of formalized after-sales execution.
Production capacityThe supplier reports lead times within 15 working days during both peak and off-peak periods, maintains written and uniformly followed finished-product inspection instructions, and lists annual production output above the stated threshold. Nevertheless, quality-control staffing is below five and the service-capability assessment procedure has no records.
Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. The same capability is confirmed in two slices, providing direct evidence of broad customization coverage.
Product Q&A
Q:What is the typical lead time for the DELTA DRS50L6SO1BN002?
A:
Lead times generally range from 8 to 12 weeks from order confirmation, subject to component availability. Expedited shipping options can be discussed upon request.
Q:Can this robot handle complex 3D pick-and-place operations?
A:
The DRS50L6SO1BN002 is a 4-axis SCARA robot optimized for planar motion and vertical insertion. For complex 3D manipulation, a 6-axis articulated robot may be a more suitable choice.
Q:What programming software is used for this robot model?
A:
This robot is programmed using DELTA's proprietary robot programming software, which offers an intuitive interface for defining robot paths, logic, and I/O.
Q:What are the warranty terms for the DRS50L6SO1BN002?
A:
A standard 12-month warranty covers manufacturing defects. Extended warranty options are available for purchase.
Q:How much does the DELTA DRS50L6SO1BN002 robot cost?
A:
Pricing is project-dependent and based on configuration. We provide custom quotes upon detailed requirement analysis. Please contact us for a quotation.
Send Inquiry
*To:
Beijing Zhongping Technology Co., Ltd.
Beijing Zhongping Technology Co., Ltd.*Content:
Supplier replies will be sent to your registered email
You may also like
Advanced Four-Axis Industrial Robot Arm for Automation Efficiency
US$15,000.00-16,600.00
1 Piece(MOQ)
ESTUN iER3-400-SR SCARA Robot Arm, High-Performance 4 Axis Robot for Industrial Automation
US$1.00-9,999.00
1 Piece(MOQ)
4 Axis Robot Arm with High Quality Scara Industrial Robot for Welding
US$5,000.00-10,000.00
1 Piece(MOQ)
High Precision 4 Axis Scara Robot Arm for Automation
US$10,100.00-11,100.00
1 Piece(MOQ)
Advanced Inertia 4-Axis Scara Robot for Industrial Automation
US$6,100.00-6,700.00
1 Piece(MOQ)
A 4-Axis Robot with 3200mm Arm Span for Bagging and Barreling Palletizing
US$15,000.00-70,000.00
1 Set(MOQ)
Advanced 4 Axis Scara Robot for Precision Automation Solutions
US$10,100.00-11,100.00
1 Piece(MOQ)
Desktop Small 4 Axis Scara Industrial Robot Arm Robotic Dispensing Sorting Assembling
US$4,500.00-5,000.00
1 set(MOQ)
4 Axis Robotic Arm with Compact Design Robots Industrial Automation Scara Robot
US$5,000.00-10,000.00
1 Piece(MOQ)
Desktop Small 4 Axis Scara Industrial Robot Armsorting Shipment Industrial Robot Arm
US$4,500.00-5,000.00
1 set(MOQ)
Kewei 4 Axis Industrial Palletizing Robot Arm - Payload 4-300kg for Bag/Case/Box Palletizing & Material Handling
US$20,920.00-69,735.00
1 Set(MOQ)
Dobot Mg400 Desktop Robot Arm 4-Axis Desktop Installation Scara Robot 0.75kg Cobot Arm
US$500.00-2,000.00
1 Piece(MOQ)
High Speed Autonomous 4 Axis Industrial Scara Robot for Pick and Place
US$5,000.00-10,000.00
1 Piece(MOQ)
High Quality 4 Axis Multi-Joint Scara Industrial Robot for Carry and Assemble
US$4,500.00-5,000.00
1 Piece(MOQ)
China Kowell 4 Axis Industrial Robot Arm 5-300kg Payload for Welding Palletizing Handling
US$20,000.00-70,000.00
1 Set(MOQ)
4 Axis Delta Sorting Robot Arm
US$12,000.00-50,000.00
1 Set(MOQ)
Industrial Robot Palletizer with 4-Axis Robot Arm for Efficient Material Handling Solution
US$15,000.00-70,000.00
1 Piece(MOQ)