Powered by Made-in-China.com
DELTA VFD1A5MS43AFSAA Compact AC Motor VFD for Electric Motors with Easy Commissioning
US$1.00-9,999.00
1 Piece
Product profile
Customization
AvailableApplication
Three Phase Transducer, General TransducerOutput Type
SingleModel NO.
VFD1A5MS43AFSAAPrinciple of Work
V/F Control TransducerSwitch Mode
PWM ControlMain Circuit Type
VoltageVoltage of Power Supply
Low Voltage Variable-Frequency DriveLink of Transformation
AC-DC-AC Variable-Frequency DriveNature of DC Power
Current Variable-Frequency DriveFunction
Energy Conservation and Efficiency EnhancementBrand
OtherTransport Package
CartonSpecification
4.1KGTrademark
SchneiderOrigin
ChinaHS Code
8504409999Production Capacity
1000PCS/YearKey features
Dual Motor Control Support: Natively supports both Induction Motors and Permanent Magnet synchronous motors without extra encoder cards.
Safe Torque Off Function: Compliant with SIL2/PLd safety standards to prevent unexpected motor starts during maintenance.
Built-in PLC Capability: Features 2K steps of PLC capacity for simple automation programming without external controllers.
Wide Communication Options: Includes RS-485 Modbus and supports CANopen, PROFIBUS, EtherNet/IP, and other industrial protocols.
High Starting Torque: Delivers enhanced braking and high starting torque to overcome static friction and inertia.
Compact Design: Optimized dimensions allow side-by-side installation to save space in control cabinets.
Robust Environmental Protection: PCB coating and thermal design suitable for harsh environments meeting IEC 60721-3-3 class 3C2.
Energy Efficiency: Enables up to 40% energy savings by matching motor speed to exact load requirements.
Company profile
CertifiedBusiness Type: Trading Company CertifiedR&D Capacity: ODM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 3 years CertifiedNearest Port: Tianjin PortAverage Response Time: ≤2.69h
AI-Powered supplier vetting
SummaryThe supplier is identified as a professional technical supplier providing 3D software design, ODM, industrial automation, product sales, installation, commissioning, maintenance, and repair services. It supports extensive customization and has documented finished-product inspection instructions, quality assurance, and stated lead times within 15 working days in both peak and off-peak seasons. However, it has no overseas showrooms, agents, branches, or offline trade-show experience, and no new products were developed in the past year. Supplier-management, corrective-action, and complaint-handling procedures exist but lack written records. Certification is listed as NIL, quality-control staffing is below five, and R&D engineer experience totals two years. Export activity is established, with 31%–40% of sales from exports and three years of export experience. Evidence of specific customer cases is not provided.
Supplier typeThe supplier explicitly identifies itself as a professional technical supplier and provides industrial automation-related one-stop services, including product sales, solutions, installation and commissioning, maintenance, and repair. Its stated focus covers cement, packaging, printing, rubber, textile, and machine-tool industries.
CertificationsSupplier management system certification is explicitly recorded as NIL. The provided information therefore does not demonstrate possession of relevant certifications.
After-Sales capabilityThe supplier states that it provides installation, commissioning, maintenance, and repair services and has a quality-assurance system. However, it has no overseas showroom, agent, or branch, and its complaint-handling procedure has no written records, limiting evidence of formalized after-sales execution.
Production capacityThe supplier reports lead times within 15 working days during both peak and off-peak periods, maintains written and uniformly followed finished-product inspection instructions, and lists annual production output above the stated threshold. Nevertheless, quality-control staffing is below five and the service-capability assessment procedure has no records.
Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. The same capability is confirmed in two slices, providing direct evidence of broad customization coverage.
Product Q&A
Q:What is the typical lifespan of the VFD1A5MS43AFSAA?
A:
With proper installation, maintenance, and operation within specified environmental limits, VFDs typically have a lifespan of 5 to 10 years. Component aging, particularly capacitors and fans, can influence this.
Q:How do I perform a VFD overcurrent fault troubleshooting?
A:
An overcurrent fault (OC) often indicates a motor short circuit, ground fault, sudden load increase, or incorrect motor parameters. Disconnect the motor leads and attempt to run the drive at low speed to isolate the issue. Check motor insulation with a megger and verify VFD settings against motor nameplate data.
Q:Can I use this VFD with a single-phase motor?
A:
No, the VFD1A5MS43AFSAA is designed for 3-phase AC motors. Single-phase motors are generally not ideal for speed control with standard VFDs.
Q:What is the recommended circuit breaker size for the VFD1A5MS43AFSAA?
A:
It's recommended to size the upstream protective device according to the maximum input current specification. A 3-pole molded case circuit breaker rated between 5A and 10A is often recommended for this 460V, 1.5A Heavy Duty inverter to prevent nuisance trips. Always consult local electrical codes and the product manual.
Q:How do I connect multiple motors to a single VFD?
A:
While the MS300 series has multi-motor control parameters, it is generally recommended to use a separate VFD for each motor for optimal control and protection, unless all motors start and stop simultaneously and are of the same type and rating.
Send Inquiry
*To:
Beijing Zhongping Technology Co., Ltd.
Beijing Zhongping Technology Co., Ltd.*Content:
Supplier replies will be sent to your registered email
You may also like
Electric Component 4kw VFD for Motors 220V Frequency Converter
US$85.98-89.72
1 Piece(MOQ)
Frequency Drive Inverter VFD Variable Frequency Drive Electric Converter for Motor Control
US$733.07-814.86
1 Piece(MOQ)
Professional Manufacturer Three Phase Motor Controller VFD Power for Chemicals with CE
US$53.90-59.40
1 Piece(MOQ)
Frequency Drive for Three Phase Motor 3 Phase VFD with High Performance Motor Control
US$4,546.29-5,051.43
1 Piece(MOQ)
3G3jz-Ab007 Frequency Inverter - Compact VFD with IP65 Protection Option for O_Mron
US$200.00-400.00
1 Piece(MOQ)
Jnn VFD Electric Motor Water Pumps Variable Frequency Driver for Industrial
US$73.00-80.00
5 Pieces(MOQ)
Door Control VFD for Asynchronous and Synchronous Motor with CE
US$62.00-74.00
1 Piece(MOQ)
DELTA VFD1A5ME43AFNAA Mini VFD with 1HP Motor Support and Compact Size for Tight Machine Spaces
US$1.00-9,999.00
1 Piece(MOQ)
VFD17AMS43afsaa Ms300 7.5 Kw 10HP 3 Three Phase Motor VFD for Delta
US$20.38-100.16
1 Piece(MOQ)
1.5kw 3-Phase 380V Compact Variable Frequency Drive for Delta VFD015m43b, High Torque VFD
US$200.00-400.00
1 Piece(MOQ)
7.5 HP 3-Phase Variable Frequency Drive VFD for Motor Speed Control with Overload Protection and Soft Start
US$1.00-9,999.00
1 Piece(MOQ)
VFD 100 Kw for Motor Frequency VFD for Water Pump 50Hz VFD 100 Kw with Panel
US$922.48-962.58
1 Piece(MOQ)
Jnn Variable Speed Motor VFD with 30kw Three Phase for Pump Stop/Start
US$204.00-226.00
1 Piece(MOQ)
VFD110c23A-21 C2000+ 11kw 15HP 15 HP 220V 3 Phase Input Output Motor VFD for Delta
US$20.38-100.96
1 Piece(MOQ)
VFD4a8ms11ansaaa Ms300 1HP 0.75kw 110V 120V Single Phase Motor VFD for Delta
US$20.38-100.54
1 Piece(MOQ)