Powered by Made-in-China.com
European Standard Electrical Solenoid Actuators for Pneumatic Control with Fast Actuation Actuators
US$1.00-9,999.00
1 Piece
Product profile
Customization
AvailableBrand
SiemensPower
ElectricModel NO.
electrical solenoid actuatorsAdjusted Form
Regulated TypeWorking Type
RotaryPressure
Medium PressureWork Temperature
Normal TemperatureActing Type
Double ActingMaterial
IndefiniteCustomized
Non-CustomizedStructure
IndefiniteTransport Package
CartonSpecification
1KGTrademark
SIEMENSOrigin
GermanyHS Code
8481901000Production Capacity
1000PCS/YearKey features
Fast Actuation Speed: Response time under 8ms ensures rapid switching up to 10Hz for high-frequency applications.
High Durability: MTBF exceeds 50 million cycles with robust construction for fluctuating pressures.
Low Power Consumption: Optimized design consumes only 2.5W holding power for energy efficiency.
IP65 Protection Rating: Dust and water ingress protection ensures reliability in harsh industrial environments.
Zero Leakage Guarantee: Every unit undergoes automated pressure decay testing before dispatch.
100% Duty Cycle: Designed for continuous operation without overheating or performance loss.
Versatile Seal Options: Available with FKM or NBR seals to suit different chemical and temperature needs.
Company profile
CertifiedBusiness Type: Trading Company CertifiedR&D Capacity: ODM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 3 years CertifiedNearest Port: Tianjin PortAverage Response Time: ≤4.65h
AI-Powered supplier vetting
SummaryThe supplier is identified as a professional technical supplier providing 3D software design, ODM, industrial automation, product sales, installation, commissioning, maintenance, and repair services. It supports extensive customization and has documented finished-product inspection instructions, quality assurance, and stated lead times within 15 working days in both peak and off-peak seasons. However, it has no overseas showrooms, agents, branches, or offline trade-show experience, and no new products were developed in the past year. Supplier-management, corrective-action, and complaint-handling procedures exist but lack written records. Certification is listed as NIL, quality-control staffing is below five, and R&D engineer experience totals two years. Export activity is established, with 31%–40% of sales from exports and three years of export experience. Evidence of specific customer cases is not provided.
Supplier typeThe supplier explicitly identifies itself as a professional technical supplier and provides industrial automation-related one-stop services, including product sales, solutions, installation and commissioning, maintenance, and repair. Its stated focus covers cement, packaging, printing, rubber, textile, and machine-tool industries.
CertificationsSupplier management system certification is explicitly recorded as NIL. The provided information therefore does not demonstrate possession of relevant certifications.
After-Sales capabilityThe supplier states that it provides installation, commissioning, maintenance, and repair services and has a quality-assurance system. However, it has no overseas showroom, agent, or branch, and its complaint-handling procedure has no written records, limiting evidence of formalized after-sales execution.
Production capacityThe supplier reports lead times within 15 working days during both peak and off-peak periods, maintains written and uniformly followed finished-product inspection instructions, and lists annual production output above the stated threshold. Nevertheless, quality-control staffing is below five and the service-capability assessment procedure has no records.
Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. The same capability is confirmed in two slices, providing direct evidence of broad customization coverage.
Product Q&A
Q:What is the typical lead time for these European standard solenoid actuators?
A:
We maintain significant inventory levels, allowing for same-day dispatch for standard configurations. Custom or high-volume orders typically ship within 5 to 10 business days.
Q:Are these actuators compatible with standard 24V DC PLC outputs?
A:
Yes, the electrical interface is fully compatible with standard 24V DC signals and DIN 43650 connectors. No additional signal conditioning is required for direct operation.
Q:What is the expected lifespan of the SE-SERIES-E solenoid?
A:
The unit is tested for over 50 million cycles under rated pressure and temperature conditions. Actual lifespan depends on air quality, lubrication, and switching frequency.
Q:Can I use this valve with non-lubricated compressed air?
A:
Yes, the internal seals are designed for operation with both lubricated and non-lubricated compressed air. Ensure the air supply is filtered to at least 40 microns to prevent debris accumulation.
Q:Does the actuator come with a warranty?
A:
We provide a 12-month comprehensive warranty covering manufacturing defects and material failures. Our support team assists with any performance issues verified during the warranty period.
Send Inquiry
*To:
Beijing Zhongping Technology Co., Ltd.
Beijing Zhongping Technology Co., Ltd.*Content:
Supplier replies will be sent to your registered email
You may also like
CE Alpha C Pneumatic Actuator with High Quality for Control Valve
US$14.00-180.00
10 Pieces(MOQ)
High Torque Pneumatic Valve Actuator with Scotch Yoke Mechanism for Large Valves
US$50.00-800.00
1 Piece(MOQ)
Micro Pneumatic Rotary Actuator for Heavy-Duty Robotic Control with High Torque Actuators
US$1.00-9,999.00
1 Piece(MOQ)
Pneumatic Actuator for Control Valve with Pneumatic Component
US$39.90-100.00
1 Piece(MOQ)
Double Acting Rotary Pneumatic Actuator with Fast 90 Degree Operation
US$10.00-400.00
1 Piece(MOQ)
At92D High Quality Rack and Pinion Double Acting Pneumatic Actuator with Excellent Quality
US$45.80-47.80
1 Piece(MOQ)
Aluminum Alloy Pneumatic Actuator with CE and ISO Certifications for Global Use
US$10.00-500.00
1 Piece(MOQ)
Durable Pneumatic Actuator for Precise Valve Control
US$25.00-60.00
1 sets(MOQ)
At140s Rack and Pinion Three Position Type Spring Return Single Acting Pneumatic Actuator with ISO5211
US$163.50-165.50
1 Piece(MOQ)
Original Brand New Masoneilan Size 6# Pneumatic Diaphragm Actuator 87/88 Series for Control Valve
US$600.00-750.00
1 Piece(MOQ)
ATEX Rotary Pneumatic Actuator for Standard Applications with Explosion-Proof Actuators
US$1.00-9,999.00
1 Piece(MOQ)
Pneumatic Actuator for Control Valve with Pneumatic Component
US$20.00-30.00
10 Pieces(MOQ)
At40- At400 Pneumatic Actuator for Multiple Valves with a Negotiable Price
Negotiable
1 Piece(MOQ)
At160d Alluminum Alloy Double Acting Pneumatic Actuator with Solenoid Valve etc.
US$164.00-166.00
1 Piece(MOQ)
Customizable Standard Rotary Pneumatic Actuator with Single Acting Spring Return Double Acting Control Actuation
US$19.00-3,550.00
10 Sets(MOQ)
Factory Supply Aluminum Cylinder Rack and Pinion Pneumatic Actuator for Ball Valve with Solenoid Valve
US$19.00-3,550.00
10 Sets(MOQ)