Powered by Made-in-China.com
Mechanically Jointed Rodless Cylinder for Magnetic Coupled Motion with High Load Cylinders
US$1.00-9,999.00
1 Piece
Product profile
Customization
AvailableBrand
SiemensPower
ElectricModel NO.
magnetic coupled rodless cylinderAdjusted Form
Regulated TypeWorking Type
RotaryPressure
Medium PressureWork Temperature
Normal TemperatureActing Type
Double ActingMaterial
IndefiniteCustomized
Non-CustomizedStructure
IndefiniteBore Size
8mm-200mmMounting Type
Flange MountWorking Pressure
0.15~0.8MPaWorking Temperature
-10°C~+60°CCushioning Type
Adjustable Air CushioningPiston Type
Magnetic PistonSeal Material
NBRCertification
CE, RoHSTransport Package
CartonSpecification
1KGTrademark
SIEMENSOrigin
GermanyHS Code
8412310090Production Capacity
1000PCS/YearKey features
Space-Saving Design: Provides identical stroke length within 50% less physical installation space compared to rod-style cylinders.
High Load Capacity: Supports up to 450N radial load with dual-bearing guide rail configuration to absorb eccentric loads.
Durable Performance: Mean Time Between Failures (MTBF) exceeds 50,000 cycles under rated loads.
Reduced Maintenance: Design reduces maintenance downtime by 30% compared to cantilevered rod designs.
Adjustable Cushioning: Features adjustable air/hydraulic cushioning for smooth acceleration and deceleration.
Custom Stroke Options: Offers precision custom stroke manufacturing from 50mm to 3000mm.
Versatile Mounting: Universal mounting orientation supports diverse automation setups and heavy side loads.
Company profile
CertifiedBusiness Type: Trading Company CertifiedR&D Capacity: ODM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 3 years CertifiedNearest Port: Tianjin PortAverage Response Time: ≤2.81h
AI-Powered supplier vetting
SummaryThe supplier is identified as a professional technical supplier providing 3D software design, ODM, industrial automation, product sales, installation, commissioning, maintenance, and repair services. It supports extensive customization and has documented finished-product inspection instructions, quality assurance, and stated lead times within 15 working days in both peak and off-peak seasons. However, it has no overseas showrooms, agents, branches, or offline trade-show experience, and no new products were developed in the past year. Supplier-management, corrective-action, and complaint-handling procedures exist but lack written records. Certification is listed as NIL, quality-control staffing is below five, and R&D engineer experience totals two years. Export activity is established, with 31%–40% of sales from exports and three years of export experience. Evidence of specific customer cases is not provided.
Supplier typeThe supplier explicitly identifies itself as a professional technical supplier and provides industrial automation-related one-stop services, including product sales, solutions, installation and commissioning, maintenance, and repair. Its stated focus covers cement, packaging, printing, rubber, textile, and machine-tool industries.
CertificationsSupplier management system certification is explicitly recorded as NIL. The provided information therefore does not demonstrate possession of relevant certifications.
After-Sales capabilityThe supplier states that it provides installation, commissioning, maintenance, and repair services and has a quality-assurance system. However, it has no overseas showroom, agent, or branch, and its complaint-handling procedure has no written records, limiting evidence of formalized after-sales execution.
Production capacityThe supplier reports lead times within 15 working days during both peak and off-peak periods, maintains written and uniformly followed finished-product inspection instructions, and lists annual production output above the stated threshold. Nevertheless, quality-control staffing is below five and the service-capability assessment procedure has no records.
Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. The same capability is confirmed in two slices, providing direct evidence of broad customization coverage.
Product Q&A
Q:What is the primary advantage of the MJS-HL series over rod-style cylinders?
A:
This series provides an identical stroke length within 50% less physical installation space. The mechanical carriage allows for direct mounting of heavy loads without additional external guides.
Q:Can the MJS-HL series be used for vertical lifting?
A:
Yes, but users must install a compatible brake or locking mechanism to prevent load dropping during pressure loss. We recommend sizing the cylinder with a 20% safety margin for vertical applications.
Q:How do I determine the correct bore size for my load requirements?
A:
Calculate your total mass and acceleration force, then refer to our load-speed performance curves. We provide selection support to ensure your specific payload falls within the 450N limit.
Q:What is the standard delivery lead time for these cylinders?
A:
Standard stroke units typically ship within 7-10 business days from our warehouse. Custom stroke lengths may require an additional 5 business days for precision machining.
Q:Are replacement seal kits available for long-term maintenance?
A:
Yes, we supply comprehensive seal kits containing all necessary O-rings and wear components. Replacing these every 2 years or 1 million cycles maintains optimal performance.
Send Inquiry
*To:
Beijing Zhongping Technology Co., Ltd.
Beijing Zhongping Technology Co., Ltd.*Content:
Supplier replies will be sent to your registered email
You may also like
90 Degree Rotary Cylinder Working with Gripper for Loading and Unloading Workpiece at Truss System
US$100.00-200.00
1 Piece(MOQ)
Truss System Disc-Type Rotary Cylinder with Internal Air Passage Configuration Good for Loading and Unloading
US$100.00-200.00
1 Piece(MOQ)
Advanced Rotary Cylinder for Truss Systems with Air Gripper
US$100.00-200.00
1 Piece(MOQ)
Alpha HPL Pneumatic Linear Cylinder for Valve Control with SMC Air Set
US$20.00-100.00
1 Piece(MOQ)
Te Series Pneumatic Rotary Cylinder with Rack and Pinion 90 Degree Swing for Lathe Gantry Loading Unloading
US$100.00-200.00
1 Piece(MOQ)
Belt-Driven Electric Screw Cylinder for Precise Linear Motion with High Load Capacity Cylinders
US$1.00-9,999.00
1 Piece(MOQ)
High-Performance Double Action Pneumatic Cylinder for Automation Solutions
US$10.00-20.00
1 Piece(MOQ)
Stainless Steel Rodless Cylinder for Mini Applications with Corrosion Resistance Cylinders
US$1.00-9,999.00
1 Piece(MOQ)
Zamak Zinc Alloy High-Pressure Die Cast Cylinder Housing CNC Machined Mirror Chrome Finish OEM
US$0.39-1.99
1,000 Pieces(MOQ)
Airtac Type Cylinder Sc40*100 Air Cylinder Pneumatic Actuator for Automation Pneumatic System Industry 4.0
US$6.00-135.00
5 Pieces(MOQ)
Long-Stroke Electric Actuated Cylinder for Lifting Platforms with High Load Capacity Cylinders
US$1.00-9,999.00
1 Piece(MOQ)
Advanced Pneumatic Cylinder Solutions for Industrial Automation Needs
US$12.00-18.00
1 Piece(MOQ)
Angular Air Gripper Cylinder for Parallel Clamping with High Force and Stroke Cylinders
US$1.00-9,999.00
1 Piece(MOQ)
HPL Series Heavy Duty Industrial Pneumatic Cylinder for Valve Control
US$95.00
1 Piece(MOQ)
Single Acting Pneumatic Cylinder with Versatile Application Features
US$19.00-3,550.00
10 Sets(MOQ)
Sil3 HPL Series Heavy Duty Industrial Pneumatic Cylinder for Ball Valve
US$20.00-100.00
1 Piece(MOQ)