Airtac Uws98A Double Layer Pneumatic Hose for Air Compressors

AirTAC UWS98A double-layer flame retardant pneumatic tubing adopts UL94 V-0 flame-retardant PVC outer layer to block welding sparks and prevent tube burnout and air leakage at welding stations.

The inner layer of UWS98A tubing is made of 98A polyester PU, with rated working pressure 1.0MPa at 23c to meet the air supply requirement of standard pneumatic circuits.

UWS98A pneumatic tubing has burst pressure of 3.0MPa at 23c, offering sufficient safety margin to avoid tube rupture caused by pressure fluctuation.

UWS98A tubing features small minimum bend radius, which facilitates wiring inside robot arms and narrow cabinets without excessive elbows and fittings.

The outer jacket of UWS98A tubing is non-sticky, you can peel off the outer layer easily for quick pneumatic circuit inspection and maintenance.

UWS98A tubing has high tensile strength and good abrasion resistance, extending service life under repeated friction and pulling of automated equipment.

UWS98A pneumatic tubing has good water resistance, slowing down hydrolysis and aging when used in humid workshops.

UWS98A tubing supports multiple color options for circuit classification, helping operators quickly identify air lines and simplify troubleshooting.

UWS98A double-layer flame retardant tubing works stably from -20c to 70c, suitable for normal factory conditions and slightly hot working environments.

UWS98A tubing is available in 50m and 100m per coil, so buyers can purchase according to project demand and reduce material waste.