New Construction Class A1 VIP Vacuum Insulation Panel with Low Heat Conductivity

There are three modes of heat transfer: conduction, convection, and radiation. By removing most air molecules to create a vacuum, we largely eliminate conduction and convection, significantly reducing heat flow.

The high barrier film must not be damaged. You cannot cut them on-site or puncture them with dowels. However, they can be glued to surfaces or integrated into constructions with appropriate covers.

Thin panels can be bent into cylindrical forms within limitations. Regular panels cannot form complex 2D curvatures like spheres, but new technologies allow for complex shapes and holes upon request.

The microporous filling can sustain up to 900 degrees Celsius. However, the outer plastic barrier film tolerates up to 80 degrees Celsius, with limitations on duration above 40-50 degrees Celsius.

Short-term high humidity exposure is not problematic. However, long-term exposure, especially with high temperatures, should be avoided. Installing humidity barriers is advisable to keep panels dry.