Advanced Continuous Whole-Line Roll Forming Machine for Efficient Production

The Adjustable Roll-Press Corner Forming Machine (Model YD-QC-W1200-8#) produces corner-formed frames for honeycomb panels, color-coated steel panels and mineral wool insulation panels. Film lamination, roll forming, corner notching, cut-to-length and head/tail bending are all completed in one continuous, fully automatic line.

t processes painted sheets and stainless steel sheets Painted sheet 0.4 0.6 mm stainless steel 0.4 0.6 mm 0.5 mm or below is recommended apply die lubricant to cutting edges for continuous cutting Factory trial standard 0.5 mm

Forming width is adjustable from 400 1200 mm both sides of the rollers open close simultaneously forming length is adjustable from 200 20000 mm max 65 m

Forming speed is 2 25 m min producing approximately 3500 4000 pieces in 11 hours based on 570 mm panels

Yes It is equipped with a Mitsubishi FX5U series PLC and a 10 inch color touchscreen with an intelligent menu system Roller width is electrically adjusted by a Mitsubishi servo HIWIN ball screw drive and cut to length is program based with automatic start stop of the main drive