14.20 mm Od PUR Jacket RF Cable with Stainless Steel Spring Armor

This offering is an RF cable with spring armor for cable tensile and torsional protection. Its listed construction combines a right-hand stainless steel wire spring, a tinned-wire outer conductor with at least 90% coverage, and a PUR outer jacket. The supplied parameters do not identify cable length, connector terminations, packaging contents, connected equipment, or a defined end-use application for this offering

The listed cable construction includes a stainless steel wire spring with right-hand direction and a 2.00 mm free pitch. The outer conductor is tinned wire with at least 90% coverage, while the outer jacket is PUR and specified in black or custom colour. The supplied information does not define supplied length, connector terminations, packaging, or other delivery items, so these details should be confirmed during inquiry

The outer conductor has at least 90% coverage and a nominal outer diameter of 11.50+/-0.10 mm. The cable is specified for -40 to +85 C operation and is stated to be water and oil resistant. Its minimum installation bending radius is 71 mm, whereas its repeated-flexing bending radius is 142 mm. No electrical performance values or test methods are provided

No connector type, mating interface, impedance, or equipment compatibility is stated in the supplied parameters. For physical routing assessment, the PUR jacket has a nominal outer diameter of 14.20+/-0.15 mm, and the spring has nominal inside and outside diameters of 8.50+/-0.10 mm and 10.90+/-0.10 mm. The specified installation and repeated-flexing bending radii are 71 mm and 142 mm, respectively. Compatibility should be confirmed against the intended assembly requirements

Please state the required cable length, connector terminations, and whether black or a custom jacket colour is needed. Confirm that routing space accommodates the 14.20+/-0.15 mm jacket outer diameter and that the installation condition allows the 71 mm minimum bending radius. For repeated-flexing use, assess the 142 mm bending-radius requirement.