34 GHz 50 Ohm Semi-Rigid Coaxial RF Low Loss Cable with PTFE Dielectric

This offering covers a semi-rigid RF cable for RF and electrical interconnection. Its listed construction combines a silvered copper clad steel inner conductor, a PTFE dielectric, and a ternary-alloy-plated seamless annealed bare copper-tube outer conductor. The cable is specified with 50 ohm impedance and a maximum operating frequency of 34 GHz. The available parameters do not identify a finished cable assembly, connector termination, or end preparation

The listing defines the cable's material construction and its electrical, mechanical, and environmental parameters. Dimensions include a 0.92 mm inner-conductor O.D., 2.98 mm dielectric O.D., and 3.58 mm outer-conductor O.D. The supplied table does not state cable length, connector type, fitted termination, packaging contents, or end treatment. These deliverable details should be confirmed against the purchase requirement before ordering

The cable has a stated 50 ohm impedance and a maximum operating frequency of 34 GHz. Capacitance is listed as 95.1 pF/m, and velocity is listed as 70%. Typical attenuation at 25 deg C and sea level is provided from 400 MHz to 20000 MHz, increasing from 0.23 dB/m to 2.09 dB/m across those listed points. Voltage withstanding is 5000 Vrms at 60 Hz, while working voltage is 1900 Vrms at 60 Hz

The semi-rigid structure uses a PTFE dielectric between the inner conductor and seamless annealed bare copper-tube outer conductor. The outer-conductor O.D. is 3.58 mm, and the stated bend radius is 12.5 mm. The operating temperature range is -55 to +125 deg C, while the outer-conductor withstanding temperature is listed as 175 deg C. Connector interfaces and mating compatibility are not specified in the available parameter table

For selection, confirm that the required system impedance is 50 ohm and that the intended operating frequency does not exceed the stated 34 GHz maximum. Compare available routing space with the 3.58 mm outer-conductor O.D. and 12.5 mm bend radius. Check the expected operating temperature against the -55 to +125 deg C range. Include required cable length, connector termination, and end-preparation details in the inquiry because these items are not listed