6GHz 50 Ohm Double Silvered Copper Braid Coaxial RF Cable with PVC Jacket

This offering is a coaxial RF cable for electrical and RF interconnection. Its construction includes a stranded silvered copper wire inner conductor, polyethylene dielectric, double silvered copper braid outer conductor, and PVC jacket. The published specifications list 50 Ohm impedance and a maximum operating frequency of 6 GHz. RoHS compliance is also stated for the listed cable configuration

The published information defines the cable construction and its physical dimensions. It lists a 2.26 mm stranded inner conductor, 7.24 mm dielectric O.D., 8.40 mm outer conductor O.D., and 10.80 mm jacket O.D. The outer conductor is double silvered copper braid, while the jacket is PVC. Cable length, connector type, termination, packaging, and included accessories are not specified and should be confirmed for an order

The cable has a stated 50 Ohm impedance and maximum operating frequency of 6 GHz. Typical attenuation increases across the listed frequency points, from 0.07 dB/m at 100 MHz to 0.73 dB/m at 6000 MHz. The table separately specifies 3700 Vrms working voltage and 5000 Vrms voltage withstanding. Capacitance is 101.05 pF/m, and velocity is listed as 66%

The stated electrical interface characteristic is 50 Ohm impedance; connector compatibility is not provided. The cable has a 10.80 mm jacket O.D., a 40 mm bend radius, and a weight of 180 g/m. Its outer conductor is double silvered copper braid beneath a PVC jacket. The published operating temperature range is -25 to +70 deg C

Compare the required operating frequency with the stated 6 GHz maximum and review attenuation at the applicable published frequency point. Verify the intended voltage condition against the separate 3700 Vrms working-voltage and 5000 Vrms voltage-withstanding values. Installation planning should account for the 10.80 mm jacket O.D., 40 mm bend radius, and -25 to +70 deg C temperature range.