Coaxial Ferrite RF Circulator with SMA/N Connector Option for Wide Temperature Operation

This listing covers a coaxial ferrite RF circulator for non-reciprocal RF signal circulation. The current configuration operates over 0.35-0.65G and has a listed average-power range of 10-500W. It is available in 30M and 50M bandwidth variants, and both variants retain 48X48X22 mm dimensions and a -40 to +70 temperature range. The listed interface is an SMA/N connector option.

The listing provides two selectable bandwidth configurations rather than one common bandwidth. The 30M configuration lists 0.3 insertion loss and 25 isolation, whereas the 50M configuration lists 0.4 insertion loss and 21 isolation. Both configurations share the 0.35-0.65G frequency range, 1.2 VSWR, 48X48X22 mm dimensions, and a 10-500W average-power listing. An SMA/N connector option is listed for each configuration.

The listed technical values vary by bandwidth choice. The 30M variant lists 0.3 insertion loss, 25 isolation, and 1.2 VSWR; the 50M variant lists 0.4 insertion loss, 21 isolation, and 1.2 VSWR. In this parameter table, the wider listed bandwidth is paired with higher listed insertion loss and lower listed isolation. Both variants have the same listed 10-500W average-power range.

The available data identifies the product as a coaxial connectorized ferrite RF component. The current configuration has 48X48X22 mm dimensions and an SMA/N connector option, while 1.2 VSWR is listed for both bandwidth variants. Its temperature range is listed as -40 to +70 for both the 30M and 50M choices. Confirm the required connector option and installation space against these listed mechanical details.

Please specify whether the required bandwidth is 30M or 50M when sending an inquiry. This selection matters because the 30M variant lists 0.3 insertion loss and 25 isolation, while the 50M variant lists 0.4 insertion loss and 21 isolation. Also confirm the needed SMA/N connector option and the average-power requirement within the listed 10-500W range. The required operating frequency should be within the listed 0.35-0.65G range.