DC to 18 GHz High Frequency High Isolation Low Loss Absorptive Sp4t Connectorized Electromechanical RF Switch

This listing covers a absorptive single-pole 4-throw electromechanical RF switch. The locked source specifies operation from DC to 18 GHz with 50 ohm port impedance. The current configuration uses SMA female RF ports and is described separately from every other catalog model. Its topology and RF path behavior come directly from the product-type row.

The current configuration provides SMA female RF interfaces and a DB15 male control interface. The source specifies not stated and a +12 V DC with current no more than 200 mA supply. The catalog also records a weight of 215 g, while external dimensions are retained in source Figure 5-1 with millimeter units.

The first listed band specifies isolation of not stated, insertion loss of not stated, and port VSWR of not stated. The first listed average-power limit is not stated. Switching time is no more than 15 ms, and switching life is at least 2 million operations. Every limit applies only to its stated frequency band and should not be extrapolated. These values come from the current product record rather than another model

The specified operating range is -45 deg C to +65 deg C, and the storage range is -55 deg C to +85 deg C. RF connection uses SMA female ports, while control is through the DB15 male interface. The source defines not stated and a +12 V DC with current no more than 200 mA supply. External dimensions are controlled by the retained Figure 5-1 drawing.