DC to 6 GHz High Power High Isolation Low Loss Reflective Sp2t Connectorized Electromechanical RF Switch

This listing covers a reflective single-pole 2-throw electromechanical RF switch. The locked source specifies operation from DC to 6 GHz with 50 ohm port impedance. The current configuration uses N female RF ports and is described separately from every other catalog model. Its topology and RF path behavior come directly from the product-type row.

The current configuration provides N female RF interfaces and a terminal-post control interface. The source specifies TTL control, with 0 V as logic 0 and 3.3 to 5 V as logic 1 and a +12 V DC with current no more than 275 mA supply. The catalog also records a weight of 260 g, while external dimensions are retained in source Figure 5-1 with millimeter units.

The first listed band specifies isolation of at least 70 dB, insertion loss of no more than 0.2 dB@DC to 2 GHz, and port VSWR of no more than 1.2@DC to 2 GHz. The first listed average-power limit is no more than 600 W@DC to 2 GHz. Switching time is no more than 15 ms, and switching life is at least 2 million operations. Every limit applies only to its stated frequency band and should not be extrapolated.

The specified operating range is -45 deg C to +65 deg C, and the storage range is -55 deg C to +85 deg C. RF connection uses N female ports, while control is through the terminal-post interface. The source defines TTL control, with 0 V as logic 0 and 3.3 to 5 V as logic 1 and a +12 V DC with current no more than 275 mA supply. External dimensions are controlled by the retained Figure 5-1 drawing.