Low Frequency 10W 0.1-0.2GHz Stripline RF Isolator for Radio Broadcasting Shortwave Communication

This listing covers a stripline ferrite RF isolator offered for the 0.1-0.2G frequency range. It is available in two listed bandwidth variants: 5M and 20M. Both variants use a TAB connection method, have 10W average power, and share a 50 x 50 x 15 mm size. The listing scope is limited to these stated configurations and parameters.

The listing provides a choice between 5M and 20M bandwidth configurations rather than a single fixed bandwidth. The 5M option lists insertion loss 0.5, isolation 23, and VSWR 1.2, while the 20M option lists insertion loss 0.7, isolation 20, and VSWR 1.25. Both configurations share the 0.1-0.2G frequency range, TAB connection method, and 10W average-power rating. No separate accessories or additional deliverables are specified in the supplied information.

The electrical values differ according to the selected bandwidth. At 5M bandwidth, the listed room-temperature values are insertion loss 0.5, isolation 23, and VSWR 1.2. At 20M bandwidth, the listed values are insertion loss 0.7, isolation 20, and VSWR 1.25. Therefore, the wider listed bandwidth option has higher listed insertion loss and VSWR, with lower listed isolation than the 5M option.

Both configurations use a TAB connection method and have the same 50 x 50 x 15 mm dimensions. The listed operating temperature range is -10 to +60, and the listed average power is 10W for both bandwidth choices. The product is identified as a stripline ferrite RF component. Compatibility with a particular external device, cable assembly, or mounting arrangement is not specified and should be confirmed against the TAB interface and dimensional requirements.

When requesting a quotation or selecting a configuration, specify whether 5M or 20M bandwidth is required. This choice determines the listed room-temperature relationship of insertion loss, isolation, and VSWR: 0.5/23/1.2 for 5M or 0.7/20/1.25 for 20M. Buyers should also verify that the 0.1-0.2G range, TAB connection method, 10W average power, 50 x 50 x 15 mm size, and -10 to +60 temperature range match their requirement.