PTFE Jacketed Spring Armor RF Cable with Tinned Wire Shield and Right-Hand Winding

This offering is a physical RF cable designed with spring armor for cable tensile and torsional protection. Its stated construction includes a right-hand stainless steel wire spring, a tinned-wire inner shield, and PTFE middle and outer layers. The supplied information does not identify connectors, cable length, terminations, or separate installation services for this configuration. No separate accessory package is stated

The specified cable construction comprises a stainless steel wire spring, tinned-wire inner shield, PTFE middle layer, and PTFE outer jacket. Purple-black is listed as the jacket colour, with a custom colour option also stated; blue-black is separately associated with a 9.9 mm outer jacket OD. No connector type, cable length, termination, or accessory is specified in the provided parameters. Buyers should confirm any deliverables required beyond the listed cable construction

The tinned-wire inner shield has coverage of at least 90% and a nominal OD of 8.30+/-0.10 mm. The spring has a 1.00 mm free pitch, with nominal ID and OD of 6.20+/-0.10 mm and 7.70+/-0.10 mm respectively. The minimum installation bending radius is 50 mm, while the repeated-flexing bending radius is 100 mm. The stated operating temperature range is -40 to +165 deg C

No connector type, electrical interface, or compatibility standard is specified for this RF cable. Its structure places a tinned-wire inner shield, PTFE middle layer, and PTFE outer jacket in combination with the stainless steel spring armor. The cable is specified for operation from -40 to +165 deg C. Water and oil resistance are both listed as no, so these environmental conditions should be reviewed for the intended use

For selection, compare the required routing condition with the 50 mm minimum installation bending radius and 100 mm repeated-flexing bending radius. Confirm whether the 6.20+/-0.10 mm spring nominal ID, 7.70+/-0.10 mm spring nominal OD, and stated jacket outer diameter suit the intended assembly. State the required jacket colour, because purple-black or custom is listed and blue-black has a separately stated diameter.