Industrial Cl2 Gas Sensor Electromedical Chlorine Gas Transmitter

Cover atmospheric monitoring, pipeline detection, remote-probe access, combined temperature and humidity sensing, and hazardous area deployment within one product series.

Duct variant uses corrosion-resistant stainless steel probe with waterproof sealing, enabling long-term installation directly inside chlorine-bearing closed pipelines without probe degradation.

Wall-mounted extension probe model supports cable lengths from 80cm default up to 15 meters, enabling chlorine measurement inside pipes or confined spaces while the sensor body stays accessible.

All-stainless explosion-proof model supports remote infrared parameter configuration without opening the housing, enabling safe setup in flammable and explosive hazardous area environments.

It can integrate temperature, humidity, and CL2 sensing in one housing, replacing three separate instruments and reducing installation complexity in chemical plant and lab environments.

Electrochemical stability specification of under 2% per month ensures consistent baseline readings during extended continuous deployment without frequent recalibration or replacement.

Fine 0.1ppm resolution on the two lower ranges captures small chlorine concentration changes critical for occupational exposure compliance monitoring near established safety thresholds.

Proprietary compensation combined with multi-segment factory calibration delivers repeatability within 3% and accuracy within plus or minus 10%, maintaining consistent output across varying field.

In addition to RS485 and analog outputs, wall-mounted and duct models support Wi-Fi and LoRa wireless transmission, enabling deployment in remote or hard-to-wire monitoring locations.

Each unit ships ready for immediate use after wiring. On-site recalibration is only required after prolonged long-term service, minimizing maintenance frequency and calibration equipment costs.