Industrial Digital Crane Dual Axis Angle Inclination Transmitter Sensor

Built-in Kalman filtering processes raw sensor data to suppress noise and dynamic disturbances, delivering cleaner and more stable tilt readings than standard unfiltered inclinometers.

Choose dual-axis for roll and pitch measurement or three-axis for full spatial orientation, covering X-axis from -180 to 180 degrees and Y-axis from -90 to 90 degrees.

Achieves static accuracy of plus or minus 0.1 degree on both X and Y axes, with dynamic accuracy of plus or minus 0.5 degree, suitable for structural monitoring and precision inclination control.

The digital RS485 variant supports up to plus or minus 16g acceleration measurement, enabling simultaneous tilt and vibration monitoring in drilling, heavy machinery, and mobile applications.

Both RS485 and analog output variants draw no more than 0.15W, enabling long-term battery or solar-powered deployment in remote structural monitoring sites without power infrastructure.

Bundled PC software allows users to set device addresses, adjust baud rates, read live data, and perform zero-point calibration without writing any custom code or purchasing additional tools.

IP65-rated housing with non-condensing humidity tolerance up to 95% RH and temperature drift of plus or minus 0.5 to 1 degree across -40 to +60 degrees C for reliable outdoor use.

RS485, 4 to 20mA, 0 to 5V, and 0 to 10V outputs cover PLCs, SCADA systems, data loggers, and custom embedded platforms without additional signal converters or interface modules.

Default 60cm cable length is customizable on order, allowing direct integration into enclosures, mounting brackets, or control panels without on-site cable extension or connector modifications.