A19 Pneumatic Strapping Tool for Solar Panels Load Securing

The A19 is dedicated exclusively to PET (Polyester Plastic Steel) strapping. It accommodates strap widths from 13 mm to 19 mm (1/2" to 3/4") and strap thicknesses from 0.5 mm up to 1.5 mm, perfectly matching both standard embossed and smooth high-tensile PET bands.

The machine operates within a working air pressure range of 0.5 - 0.8 MPa (5.0 - 8.0 bar / 72 - 116 psi), with 0.63 MPa being the recommended optimum pressure. It consumes approximately 0.3 L/min of compressed air. A standard industrial air compressor or small mobile air compressor equipped with an air filter/regulator is sufficient.

No. It utilizes advanced pneumatic friction heat welding. The overlapping PET straps are fused directly together by high-speed friction, delivering joint strength efficiency of 80% to 85% without spending money on metal clips.

The operation is simple and intuitive: (1) Insert the overlapped PET straps into the machine; (2) Press the grey tensioning button until the strap is fully tightened; (3) Press the orange welding button until the strap is fused and cut (2-5s); (4) Squeeze the handle and press the reversing button to smoothly release the tool.

Yes. The A19 is equipped with an overhead suspension ring for easy mounting on spring balancers, making it ideal for intensive factory packing lines. We provide full sets of wear parts including tooth plates, tension wheels, cutters, and air cylinder seals for easy maintenance.