Powered by Made-in-China.com
Heavy Duty High Head Axial Split Casing Centrifugal Pump for Efficient Industrial Use
US$1,305.00-1,000,000.00
1 Piece
Product profile
Customization
AvailableAfter-sales Service
48 Hours OnlineWarranty
12 Months After DeliveryModel NO.
MDK100-60*10Max.Head
>150mMax.Capacity
>400 L/minDriving Type
MotorImpeller Number
Multistage PumpWorking Pressure
High Pressure PumpInfluent Type of Impeller
Double-Suction PumpPosition of Pump Shaft
Horizontal PumpPump Casing Combined
Horizontal Split PumpsMounting Height
Since Irrigation Centrifugal PumpsImpeller
ClosedUsage
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating PumpMaterial
Ci,CD,Ss,Duplex SsVoltage
380V/415V/440V/460V/3kv/6kv...Application1
Oilfields and TerminalsApplication2
Crude Oil and Oil Product PipelineApplication3
Water PipelinesApplication 4
High Pressure ServicesFrequency
50Hz/60HzLiquid Temperature
-20℃-105℃Transport Package
Standard Export Wooden PackingSpecification
MDK100-60*10Trademark
SanChangOrigin
Changsha, Hunan, ChinaHS Code
8413709990Production Capacity
200 Sets/MonthKey features
1.Radially split, between-bearing two-stage casing design Horizontal radially split barrel casing, double impeller in series layout. Split plane perpendicular to shaft centerline; casing owns outstand
2.Series twin-impeller hydraulic layout Two single-suction impellers mounted back-to-back, most axial force self-balanced inherently; only tiny residual axial load borne by thrust bearing.
3.High-rigidity robust rotor assembly Long rigid shaft with precision dynamic balance, compact bearing span to limit shaft deflection under high differential pressure. Standard replaceable shaft sleev
4.Full API610 standardized construction Seal chamber conforms to API682 / ISO21049, compatible with single / double mechanical seal + auxiliary flush plans. Optional oil bath, forced feed oil lubricat
5.Flexible material & medium compatibility Available in cast iron, carbon steel, stainless steel, duplex stainless steel. Suitable for clean / slightly corrosive low-viscosity process fluid, hot boile
Easy maintenance: Axially split casing, pull-out rotor without disconnecting piping or motor, short overhaul time.
Stable operation: Back-to-back impellers self-balance most axial thrust, low vibration, longer seal & bearing life.
High pressure capability: Multi-stage design delivers ultra-high head, eliminates complicated pump serial installation.
Excellent suction performance: Optional double-suction first impeller reduces NPSHR for poor inlet pressure conditions.
Wide applicability: Wide flow/head range, flexible material options for oil, petrochemical, power and corrosive media.
Company profile
CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service AvailableExport Year: 2012-05-31 CertifiedNearest Port: Shenzhen Port, Shanghai PortAverage Response Time: ≤4.98h CertifiedTerms of Payment: LC, T/T
AI-Powered supplier vetting
SummaryHUNAN SANCHANG PUMP CO., LTD. is identified as a Chinese factory established in 2003 and operating in Hunan, with pump design, research, manufacturing, installation, and sales capabilities. Its stated product range covers multistage, centrifugal, split-case, anti-corrosive, mining-water, oil, single-stage, seawater, chemical, and sewage pumps. The supplier reports ISO9001:2015 and ISO14001:2015 certification, four production lines, 21–30 quality-control staff, and annual output across several pump categories. Reported production includes 2,000 multistage, 1,200 split-case, 3,000 end-suction centrifugal, 1,000 long-shaft, and 4,000 submersible pump sets annually. It serves domestic and export markets and states one-month peak and off-peak lead times. Evidence supports manufacturing scale, product breadth, and formal management certifications. However, the provided information does not sufficiently establish after-sales service systems, financial credibility, customization processes, or named customer...
Supplier typeThe supplier is described as a limited company and factory in China, engaged in pump design, research, production, installation, and sales. It is specifically presented as a manufacturer of industrial and water pumps, with its head office and operations located in Hunan.
CertificationsThe supplier explicitly reports holding ISO9001:2015 and ISO14001:2015 certificates, along with other unspecified certifications. This provides direct evidence of certified quality-management and environmental-management systems.
R&D capabilityThe supplier explicitly describes pump design and research and development activities, including water-pump R&D, and reports seven years of total R&D-engineer experience. Its stated portfolio includes 26 product series and 2,160 specifications, supporting product-development breadth, although no patents, testing facilities, or recent innovation results are provided.
Production capacityThe supplier reports four production lines, 21–30 quality-control staff, and annual production across multiple pump categories, including 2,000 multistage, 1,200 split-case, 3,000 end-suction centrifugal, 1,000 long-shaft, and 4,000 submersible pump sets. The stated one-month lead time in both peak and off-peak seasons further supports operational capacity, although employee counts differ between company descriptions and should be confirmed.
Product Q&A
Q:What are the main application scenarios of API 610 BB3 pump?
A:
The BB3 multi-stage pump is widely applied in petrochemical industry, chemical processing, thermal power generation, and industrial water supply systems. It is specially suitable for medium-pressure, continuous and stable fluid delivery process with moderate temperature working conditions.
Q:What are the core advantages of BB3 multi-stage pumps?
A:
BB3 pumps feature a mature horizontal split structure, convenient on-site maintenance, high operational stability and low vibration. With balanced rotor design and reliable hydraulic performance, it delivers stable flow and head, and has lower investment and maintenance costs compared with BB4 pumps under conventional process conditions.
Q:Is the BB3 pump compliant with international industrial standards?
A:
Yes. Our BB3 multi-stage pumps are strictly designed and manufactured in accordance with API 610 latest standards, meeting international industrial requirements for process pumps, with high safety, universality and interchangeability of spare parts.
Q:What is BB3 maximum flow rate?
A:
Standard range: 5 ~ 3,200 m3/h; custom oversized design up to 4,500 m3/h.
Q:What is BB3 maximum single pump head?
A:
Standard multi-stage BB3 max head up to 3,200 m; maximum casing design pressure 350 bar.
Send Inquiry
*To:HUNAN SANCHANG PUMP CO., LTD.
HUNAN SANCHANG PUMP CO., LTD.*Content:
Supplier replies will be sent to your registered email
You may also like
Wholesale Ahh Type Wear-Resistant Centrifugal Heavy Duty Rubber Horizontal Slurry Pump for Mining
US$458.00-471.00
1 Piece(MOQ)
Heavy Duty Diesel Double Suction Water Pump for High Flow
US$2,000.00-100,000.00
1 Piece(MOQ)
Dredge Low Volume High Pressure Diesel Engine Horizontal Heavy Duty Slurry Pump
US$1,746.00-1,796.00
1 set(MOQ)
4/3 Inch Heavy Duty Horizontal Slurry Pump Price for Industrial Use
US$1,000.00
5 Pieces(MOQ)
Efficient Horizontal Loop Reactor Axial Horizontal Self Priming Acid Chemical Slurry Centrifugal Flow Pump for Loop Reactors
US$1,500.00-50,000.00
1 Piece(MOQ)
Heavy Duty Marine Sea River Dredge Pump for Sand Silica Silt Slurry
US$2,500.00-38,500.00
1 Piece(MOQ)
Cantilevered Phc-100 Cast Iron Casing Heavy Duty Slurry Pump for Drainage Pit
US$300.00
1 Piece(MOQ)
7.5kw Electric Double Suction Split Casing Centrifugal Water Pump in Red or Blue Color for Cooling Tower
US$970.00-1,175.00
1 set(MOQ)
Hot Sale Centrifugal Double Suction Split Casing Water Pump for HVAC and Cooling Tower with Long Life
US$15,510.00-19,982.00
1 set(MOQ)
Duty High Chrome Alloy Horizontal Centrifugal Slurry Pump for Chemical Process
US$2,654.00
1 set(MOQ)
China Gold Mining Solid Heavy Duty Centrifugal Slurry Pump
US$2,654.00
1 set(MOQ)
Single-Stage Heavy Duty Mineral Slurry Pump for Metallurgy, Coal Mining Processing
US$299.00
1 Piece(MOQ)
55kw Heavy-Duty Water Pump for Reliable Agricultural Use
US$1,000.00-1,100.00
1 Set(MOQ)
High Head High Lift for Industrial Waste Sludge Handling-Heavy Duty High Pressure Slurry Pump
US$1,399.00-6,999.00
1 Piece(MOQ)
Durable Vertical Magnetic Chemical Pump for Heavy-Duty Applications
US$500.00-50,000.00
1 pcs(MOQ)