Powered by Made-in-China.com
High Pressure Multi-Stage Pump with an Axially Split Casing
US$3,105.00-45,000.00
1 Piece
Product profile
Customization
AvailableMax.Head
200-3000mMax.Capacity
50-3000m3/HModel NO.
MDK SeriesDriving Type
Electric Motor or DieselImpeller Number
Multistage PumpWorking Pressure
High Pressure PumpInfluent Type of Impeller
Double-Suction PumpPosition of Pump Shaft
Horizontal PumpPump Casing Combined
Horizontal Split PumpsMounting Height
Suction CentrifugalImpeller
ClosedUsage
Pump, Pumps, Circulating Pump, Irrigation PumpsMaterial
Ci,CS,Di,Ss,Duplex SsVoltage
380V/415V/440V/460V/3kv/6kv...Seal
Mechanical SealApplication 1
Refined Product PipelineApplication 2
LPG Pipeline and CO2 InjectionApplication 3
Crude Oil and Oil Product PipelinesApplication 4
Water InjectionApplication 5
Gasoline Pipeline ServiceApplication 6
HP Amine CirculationApplication 7
Boiler Feed WaterTransport Package
Standard Export Wooden PackingSpecification
Discharges size: 3~14 inchesTrademark
San ChangOrigin
Changsha, Hunan, ChinaHS Code
8413709990Production Capacity
500Key features
1.Radially split, between-bearing two-stage casing design Horizontal radially split barrel casing, double impeller in series layout. Split plane perpendicular to shaft centerline; casing owns outstand
2.Series twin-impeller hydraulic layout Two single-suction impellers mounted back-to-back, most axial force self-balanced inherently; only tiny residual axial load borne by thrust bearing.
3.High-rigidity robust rotor assembly Long rigid shaft with precision dynamic balance, compact bearing span to limit shaft deflection under high differential pressure. Standard replaceable shaft sleev
4.Full API610 standardized construction Seal chamber conforms to API682 / ISO21049, compatible with single / double mechanical seal + auxiliary flush plans. Optional oil bath, forced feed oil lubricat
5.Flexible material & medium compatibility Available in cast iron, carbon steel, stainless steel, duplex stainless steel. Suitable for clean / slightly corrosive low-viscosity process fluid, hot boile
Easy maintenance: Axially split casing, pull-out rotor without disconnecting piping or motor, short overhaul time.
Stable operation: Back-to-back impellers self-balance most axial thrust, low vibration, longer seal & bearing life.
High pressure capability: Multi-stage design delivers ultra-high head, eliminates complicated pump serial installation.
Excellent suction performance: Optional double-suction first impeller reduces NPSHR for poor inlet pressure conditions.
Wide applicability: Wide flow/head range, flexible material options for oil, petrochemical, power and corrosive media.
Company profile
CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service AvailableExport Year: 2012-05-31 CertifiedNearest Port: Shenzhen Port, Shanghai PortAverage Response Time: ≤5.10h CertifiedTerms of Payment: LC, T/T
AI-Powered supplier vetting
SummaryHUNAN SANCHANG PUMP CO., LTD. is identified as a Chinese factory established in 2003 and operating in Hunan, with pump design, research, manufacturing, installation, and sales capabilities. Its stated product range covers multistage, centrifugal, split-case, anti-corrosive, mining-water, oil, single-stage, seawater, chemical, and sewage pumps. The supplier reports ISO9001:2015 and ISO14001:2015 certification, four production lines, 21–30 quality-control staff, and annual output across several pump categories. Reported production includes 2,000 multistage, 1,200 split-case, 3,000 end-suction centrifugal, 1,000 long-shaft, and 4,000 submersible pump sets annually. It serves domestic and export markets and states one-month peak and off-peak lead times. Evidence supports manufacturing scale, product breadth, and formal management certifications. However, the provided information does not sufficiently establish after-sales service systems, financial credibility, customization processes, or named customer...
Supplier typeThe supplier is described as a limited company and factory in China, engaged in pump design, research, production, installation, and sales. It is specifically presented as a manufacturer of industrial and water pumps, with its head office and operations located in Hunan.
CertificationsThe supplier explicitly reports holding ISO9001:2015 and ISO14001:2015 certificates, along with other unspecified certifications. This provides direct evidence of certified quality-management and environmental-management systems.
R&D capabilityThe supplier explicitly describes pump design and research and development activities, including water-pump R&D, and reports seven years of total R&D-engineer experience. Its stated portfolio includes 26 product series and 2,160 specifications, supporting product-development breadth, although no patents, testing facilities, or recent innovation results are provided.
Production capacityThe supplier reports four production lines, 21–30 quality-control staff, and annual production across multiple pump categories, including 2,000 multistage, 1,200 split-case, 3,000 end-suction centrifugal, 1,000 long-shaft, and 4,000 submersible pump sets. The stated one-month lead time in both peak and off-peak seasons further supports operational capacity, although employee counts differ between company descriptions and should be confirmed.
Product Q&A
Q:What are the main application scenarios of API 610 BB3 pump?
A:
The BB3 multi-stage pump is widely applied in petrochemical industry, chemical processing, thermal power generation, and industrial water supply systems. It is specially suitable for medium-pressure, continuous and stable fluid delivery process with moderate temperature working conditions.
Q:What are the core advantages of BB3 multi-stage pumps?
A:
BB3 pumps feature a mature horizontal split structure, convenient on-site maintenance, high operational stability and low vibration. With balanced rotor design and reliable hydraulic performance, it delivers stable flow and head, and has lower investment and maintenance costs compared with BB4 pumps under conventional process conditions.
Q:Is the BB3 pump compliant with international industrial standards?
A:
Yes. Our BB3 multi-stage pumps are strictly designed and manufactured in accordance with API 610 latest standards, meeting international industrial requirements for process pumps, with high safety, universality and interchangeability of spare parts.
Q:What is BB3 maximum flow rate?
A:
Standard range: 5 ~ 3,200 m3/h; custom oversized design up to 4,500 m3/h.
Q:What is BB3 maximum single pump head?
A:
Standard multi-stage BB3 max head up to 3,200 m; maximum casing design pressure 350 bar.
Send Inquiry
*To:HUNAN SANCHANG PUMP CO., LTD.
HUNAN SANCHANG PUMP CO., LTD.*Content:
Supplier replies will be sent to your registered email
You may also like
Tpow High Pressure Double Suction Split Casing Diesel Fire Pump
US$3,568.50-14,523.60
1 Set(MOQ)
ISO 13709 High Pressure Split Casing Multi-Stage Propane Transfer Pump
US$1,000.00-45,000.00
1 Piece(MOQ)
High-Performance Bb3 Horizontal Multi-Stage Axially Split Casing Boiler Feed Water Pump
US$3,105.00-45,000.00
1 Piece(MOQ)
High Pressure Large Capacity Multi-Stage Booster Centrifugal Water Pump
US$500.00-12,000.00
1 Piece(MOQ)
API610 Bb3 High Pressure Axially Split Casing Multistage Pump
US$3,105.00-49,000.00
1 Piece(MOQ)
Electrical Multi-Stage High Pressure Centrifugal Fire Fighting Pump
US$1,896.50-8,456.90
1 Set(MOQ)
Blossom Ldd (BB4) -High Pressure Segmented Multi-Stage Centrifugal Pump
US$20,000.00-80,000.00
1 Piece(MOQ)
High-Pressure, High-Flow Centrifugal Stainless Steel Multi-Stage Booster Industrial Horizontal Water Pump
US$43.30-47.00
100 Pieces(MOQ)
Heavy Duty API610 Bb3 Type Horizontal Multi-Stage High Pressure Gas Condensate Pump
US$1,305.00-49,000.00
1 Piece(MOQ)
High Pressure Multi-Stage Centrifugal Sewage Pump with Motor
US$1,659.80-7,856.90
1 Set(MOQ)
Customizable OEM Electric 30 HP Single-Stage Centrifugal Pump with High Pressure End Suction High Performance
US$1,000.00-1,500.00
1 Piece(MOQ)
High Pressure Horizontal Booster Centrifugal Water Pump Multi Stage Dewatering Pump
US$1,899.00
1 set(MOQ)
High-Pressure Electric Water Centrifugal Pipeline Pump with Single-Stage Structure
US$865.00-943.00
2 Pieces(MOQ)
High Pressure Centrifugal Slurry Pump/Trash Pump/Mining Pump with Ce Proved
US$1,000.00
1 Piece(MOQ)
