Powered by Made-in-China.com
CNC Aluminum Intake Manifold for Chevy S283 327 350
US$90.00
1,000 Pieces
Product specifications
intake manifold
Sample price:US$200.00/piece.Request sample
Product profile
Customization
AvailableAfter-sales Service
YesWarranty
YesModel NO.
Intake ManifoldSuitable for Car Brands
All BrandsEngine Type
V8Classification
Subsonic InletMaterial
AluminumPlacement
Near the Automobile Front GrilleCertification
TS16949, ISO9001Type
Inner TubeAdjustable Air Inlet
Two Dimensional AdjustableSupersonic Inlet
External PressureShock Wave Number
2 WaveMain Market
North AmericaApply
Automotive LabTolerance
0.01mmSurface Treatment
AnodicTransport Package
CartonSpecification
21*20*15Trademark
StableOrigin
ChinaHS Code
8708999990Production Capacity
1000000000Key features
Customization Support: Supports custom development via sample, CAD, STP, and IGS drawings.
ISO9001 & TS16949 Certified: Manufacturing controlled under TS 16949 quality system standards.
Precision CNC Bending: Handles seamless tubes up to 120mm diameter with single-pass bending accuracy.
Atmosphere Furnace Brazing: Uses nitrogen or hydrogen controlled atmosphere to prevent oxidation during welding.
Comprehensive Leak Testing: All pipes undergo 1.2 Bar pressure testing for 30 seconds to ensure integrity.
Salt Spray Resistance: Zinc coating passes 24-hour white rust and 48-hour red rust tests per ASTM B117.
Raw Material Verification: Mechanical and chemical properties tested before mass production to ensure strength.
3D Reverse Engineering: Utilizes 3D scanning and SolidWorks/UG for precise fixture and part design.
Company profile
Business Type: Manufacturer/Factory, Trading CompanyAverage Response Time: ≤6.86h
AI-Powered supplier vetting
SummaryJinjiang Sidebo Technology Industrial Co., Ltd. is identified as both a trading company and manufacturer/factory in China, with nearly 40 years of experience in stamping, welding, bending, plastic injection, and aluminum die casting. Its stated product range focuses on automotive engine and transmission components, supported by three production lines, 11–20 quality-control staff, and documented production quantities for several products. The company carries out TS 16949 quality controls across raw materials, production, and after-sales processes. It offers sample-, design-, flexible-, and minor-customization, but does not provide 3D software design, ODM, SDK, or overseas service infrastructure. No new products were reported in the past year. Formal service assessment, corrective-action, approved-supplier, and complaint-handling procedures are absent. Financial capacity data is listed for multiple years, but the slices provide no assessable financial results. Customer cases and named brand OEM evidence are...
Supplier typeThe supplier is explicitly classified as both a Trading Company and Manufacturer/Factory, is a limited company, and operates in Fujian, China. Its product scope is concentrated on oil pans, timing covers, oil pickups, dipsticks, and related automotive components.
CertificationsThe company states that TS 16949 is fully implemented across raw-material inspection, production processes, and after-sales activities. A CTI audit is also recorded for the period from 2026-04-10 to 2027-04-09, but the audit type and evaluation result of 0 are not explained sufficiently to establish an additional certification advantage.
After-Sales capabilityTS 16949 is stated to cover after-sales processes, but the supplier has no written procedures or records for service-capability assessment, corrective and preventive actions, or effective customer-complaint handling. This is explicit evidence of a deficiency in documented after-sales management.
R&D capabilityThe supplier is identified as a professional technical supplier and has 6–10 years of total R&D-engineer experience, but it reported no new products in the past year and does not provide ODM, SDK, or 3D software design services. The evidence therefore shows some technical capability but a clear limitation in recent and software-related innovation services.
Production capacityThe supplier reports nearly 40 years focused on stamping, welding, bending, plastic injection, and aluminum die casting, operates three production lines, and has 11–20 quality-control staff. It also provides product-specific output quantities for engine oil pans, dipsticks, timing covers, transmission oil pans, and oil pickups, supporting an established automotive-component production capability.
Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, flexible customization, and minor customization. However, it does not provide 3D software design services, so customization is supported without evidence of advanced 3D design assistance.
Product Q&A
Q:Can you customize the product based on my drawings?
A:
Yes, we support custom development using samples, CAD, STP, and IGS drawings.
Q:What quality certifications do you hold?
A:
We are certified under ISO9001 and control quality according to the TS 16949 system.
Q:How do you ensure the bending angle accuracy?
A:
We use CNC bending machines for single-pass processing and verify angles using calibrated inspection gauges.
Q:What surface treatment is applied to the steel pipes?
A:
We apply zinc coating to prevent rust, as it is more resistant to water and particle shedding than powder coating.
Q:How is the leak testing performed?
A:
Pipes are tested with 1.2 Bar air pressure for 30 seconds; any drop in pressure indicates a leak requiring rework.
Send Inquiry
*To:Jinjiang Sidebo Technology Industrial Co., Ltd.
Jinjiang Sidebo Technology Industrial Co., Ltd.*Content:
Supplier replies will be sent to your registered email
You may also like
Small Block Dual Plane Aluminum Intake Manifold for Chevy
US$80.00-125.00
5 Pieces(MOQ)
Aluminum Black Car CNC Billet Intake Manifolds for Engines
US$300.00
100 Pieces(MOQ)
Single Plane Aluminum Intake Manifold for Chevy GM Ls1 Ls2 Ls6
US$99.00-150.00
5 Pieces(MOQ)
Factory Supply Small Block Dual Plane Air Gap Intake Manifold Aluminum for Chevy
US$80.00-125.00
5 Pieces(MOQ)
CNC Aluminum Intake Manifold for Audi RS3 Ea835
US$1,115.00-1,145.00
5 Pieces(MOQ)
Sbc Small Block Chevy 350 Dual Plane Satin Aluminum Intake Manifold 1955-95
US$100.00
1 Piece(MOQ)
Custom Aluminum CNC Machining Milling Intake Manifold Kit for Modified Application
US$5.00
100 Pieces(MOQ)
Customized Polish Aluminum Carburetor Intake Manifold for Automobile
US$80.00
50 Pieces(MOQ)
Polish Aluminum Die Casting Intake Exhaust Manifold for Motorcycle Parts
US$1.00-20.00
1 Piece(MOQ)
Customized Aluminum Alloy Metal Intake Manifold for Agricultural Machinery
US$50.00-150.00
50 Pieces(MOQ)
Aluminum Isl Diesel Intake Manifold for Truck Car Bus
US$250.00
500 Pieces(MOQ)
Intake Manifold for Jza80 2jz 2jzgte Aristo Cast Aluminum 93-98
US$190.00-240.00
1 pieces(MOQ)
Epman Billet Aluminum Throttle Body Spacer Fit for BMW 325I E46 L6 2.5L 2001-2006 Intake Manifold Epaa01g250
US$7.20-8.00
100 Pieces(MOQ)
