High Quality Performance Inertial Nanvigation System for Automation Industry

IMUs operate by use of reference data, bias values from an initial starting point, and calculate changes to these values using its integrated sensors. A central processing unit calculates directional information; position, speed, orientation, and direction of movement, at a given time in space using the IMU. The sensors suffer from orientation drift as they calculate these variables using a process known as dead-reckoning and are subject to accumulative errors.

Dead reckoning is the calculation of current position by use of a previously determined location and the advancement of that position by a known or estimated directional speed over an elapsed time. The process was first used in marine navigation and relied upon manual measurements. IMUs calculate accurate directional information using integrated sensors and operate using these same principles. Orientation drift is the propagation of orientation errors. Small measurement errors of acceleration an

IMUs measure six degrees of freedom. This includes the measurement of linear motion over three perpendicular axes (surge, heave, and sway), as well as rotational movement about three perpendicular axes (roll, pitch, and yaw). This yields six independent measurements that together define the movement of an object or vehicle.

The IMU is comprised of at least two dedicated sensors, one or more linear accelerometers and one or more gyroscopes or angular accelerometers. An optional magnetometer may be integrated into the unit to calibrate against orientation drift. Accelerometers detect the direction and magnitude of change in velocity. Simple accelerometers measure linear motion while biaxial and triaxial accelerometers detect a change in velocity over a plane or three-dimensional space, respectively. The IMU possesses

for our standard model, if we have them in stock, only need 2~3days to re-test before shipping, if it is out of stock, then need around 2 weeks to arrange the production and tests. For the ODM electronic product, if needing to modify the structure, it will need around 3~4 weeks to arrange the production and tests.