How many kinds of moulds can you make?

We can make many kinds of moulds, such as injection molding, blow molding and stamping, mold die-casting mold and silicone rubber mold. In addition, we can also produce plastic mold, hardware mold etc.

How to pack the moulds and products?

For moulds, we will be coated one layer anti-rust oil first and then also will be covered thin films on the mould, finally pack into non-fumigation wooden case. And as to products, we will pack into standard export cartons or as per customers request to pack.

Fast Cycle Time Injection Molding Optimized for High Efficiency Mass Production

Name: Fast Cycle Time Injection Molding Optimized for High Efficiency Mass Production
Brand: Shenzhen Smart Mold Technology Limited
SKU: 2256322315

Guangdong, ChinaShenzhen Smart Mold Technology Limited

US$10,000.00

1 Piece

Sample price:US$1.00/piece.Request sample

Product profile

Customization

Available

Shaping Mode

Injection Mould

Surface Finish Process

Painting

Mould Cavity

Multi Cavity

Plastic Material

HDPE

Process Combination Type

Single-Process Mode

Application

Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware

Runner

Hot Runner

Design Software

Installation

Fixed

Certification

TS16949, CE, ISO, FDA

Standard

HASCO

Customized

Key features

Fast Cycle Time: Optimized for high efficiency mass production with rapid injection molding cycles.

Multi-Cavity Moulds: Supports multi-cavity configurations to maximize output volume per cycle.

Wide Material Range: Compatible with ABS, PP, PC, PA, POM, PE, PU, PVC, PBT, PMMA, and more.

Hot Runner System: Utilizes hot runner technology for improved material efficiency and cycle speed.

High Precision Tolerance: Achieves tight tolerances of +/- 0.01-0.02mm for superior part accuracy.

Comprehensive Certifications: Certified with TS16949, CE, ISO, and FDA standards for global compliance.

Customized Solutions: Fully customizable moulds and products tailored to specific client requirements.

Quality Inspection: Includes CC inspection before shipment with options for factory visits or third-party checks.

Company profile

Experienced TeamYears of Export ExperienceHigh Repeat Buyers ChoiceFlexible Customization

Shenzhen Smart Mold Technology Limited

Guangdong, China

Business Type: Manufacturer/Factory, Other CertifiedR&D Capacity: ODM Service AvailableExport Year: 2010-08-19Average Response Time: ≤4.80h

AI-Powered supplier vetting

SummaryThe supplier is a Shenzhen-based trading company associated with manufacturing activities and a factory location in Dongguan. It reports OEM/ODM capability, flexible customization, diverse processing and surface-treatment equipment, and export markets across Asia, Europe, Australia, and North America. CE compliance is stated, but supplier management-system certification is listed as nil. Quality-control testing equipment is reported as zero, while quality assurance and traceability status are unknown. The supplier has procedures for complaints and corrective actions but no written records. It has no inventory, overseas warehouse, overseas branch, overseas showroom, or offline trade-show participation. No new products were launched in the last year, and no Fortune 500 cooperation was reported. Repeat-buyer preference is stated at 80%–100%, but customer cases are not specifically documented.

After-Sales capabilityThe supplier has procedures for customer complaints and corrective/preventive actions, but no written records. It also lacks inventory, overseas warehouses, overseas showrooms, overseas agents or branches, and has no overseas service countries stated, limiting documented after-sales support infrastructure.

R&D capabilityThe supplier reports flexible design and customization services and has two R&D engineers, but it launched no new products during the last year. The available evidence supports design support but does not demonstrate strong recent product innovation.

Production capacityThe supplier describes extensive processing and surface-treatment equipment, supports small-batch and large-scale injection-model appearance production, and states one-month lead times in both peak and off-peak seasons. However, it reports no in-stock capability, and the outsourcing procedure and manufacturing contract status are unknown.

Customization capabilityThe supplier explicitly offers flexible customization, minor customization, and customization from customer designs. Its stated OEM/ODM capability, small-batch production, injection-model appearance work, and multiple machining and finishing processes directly support customized orders.

Product Q&A

Q:When can I get the price?

We usually quote within 24 hours after we get your inquiry. If it is very urgent, please call us or tell us in your email so that we will regard your inquiry as priority.

Q:How long is the lead time for mold?

It depends on the mold's size and complexity. Normally the lead time is 25-35 days. If the molds are very simple and not in big size, we can work out with 15 days.

Q:I have no 3D drawing, how should I start the new project?

You can provide us a sample, we will help finish the 3D drawing design. Please provide: 1. 2D and 3D (format: CAD, PDF/DWG, DXF/DXW/GES/STEP etc.), 2. Material, 3. Quantity needed, 4. Surface treatment, 5. Any special packing or other requirements.

Q:Before shipment, how to make sure the products quality?

We are specialized in high quality products. We have CC to inspect the products before each shipment. You can come to visit our factory or ask a third party for inspection. Or we can send you videos to show the production process.

Q:Can I get a sample for check?

Yes, just need sample cost and shipment cost. We will return it back in mass production.