Durable Al6005-T5 Solar Roof Bracket for All Weather Conditions

Yes, the AL6005-T5 bracket is modular and compatible with mainstream tile types, including clay tiles, concrete tiles and slate tiles. Its adjustable hook and base design can adapt to different tile thicknesses and radians, allowing stable installation without damaging the roof structure.

No need to penetrate the roof. The brackets are fixed under the tiles by non-invasive hooks, using the original structure of the roof to bear the load and avoid drilling or damaging the waterproof layer. After installation, the tiles can completely cover the base of the bracket to ensure that waterproof performance is not affected.

AL6005-T5 alloy is anodized to form a dense oxide film on the surface, which can withstand salt spray corrosion for more than 25 years and meets AS/NZS 1170 standard. The supporting 304 stainless steel bolts further enhance corrosion resistance and are suitable for high-corrosion environments such as coastal and industrial areas.

The design load of the support is 1.4 kN/m2 (snow) and 60 m/s wind speed (approximately 216 km/h), which is verified through dynamic wind tunnel testing and static load simulation. Its triangular support structure distributes stress and ensures stability in extreme weather. It is recommended to carry out reinforcement design according to the local climate during actual installation.

It is recommended to inspect it once a year, focusing on: Bolt tightness: Prevent loosening caused by vibration. Surface coating integrity: Inspect the anodic oxide layer for scratches or flaking. Clean drainage trough: avoid falling leaves or debris clogging affecting drainage. If parts are found to be deformed or corroded, you can contact the supplier to replace them for free (within the warranty period).