Powered by Made-in-China.com
Dedusting Project 30 Tons Intermediate Frequency Induction Furnace Steelmaking Melting Scrap
US$180,000.00-1,000,000.00
1 Piece
Product profile
Customization
AvailableCertification
ISOInstallation Method
Factory InstallModel NO.
YCKJ-furnaceOperation Type
AutomaticMedium Material
Chemical Synthetic FiberDust Collecting Method
DryType
Granular Layer Dust CollectorTransport Package
ContainerSpecification
Q235 or 304SSTrademark
Yachuang TechnologyOrigin
Fuzhou FujianHS Code
8454309000Production Capacity
20pieces /YearKey features
High Dust Capture Rate: Achieves a dust capture rate of 95% or higher with no visible smoke outside the roof.
Low Emission Standards: Emission levels are kept below 25 mg/Nm3, well under the 50 mg/Nm3 limit.
Efficient Filtration: Uses pulse bag filters with a collection efficiency greater than 95%.
Large Capacity System: System exhaust capacity reaches 500,000 m3/h for 3x30T induction furnaces.
Automatic Operation: Fully automatic operation type with integrated electrical control system.
Factory Installation: Comes with factory installation service for seamless setup.
ISO Certified: Product holds ISO certification ensuring quality and safety standards.
Dust Recycling: Collected dust is recovered or utilized via controller and swing valve.
Company profile
Business Type: Manufacturer/FactoryExport Year: 2018-04-23Nearest Port: Jiangyin, MaweiAverage Response Time: ≤8.26hTerms of Payment: T/T, Small-amount paymentInternational Commercial Terms(Incoterms): FOB
AI-Powered supplier vetting
SummaryFUJIAN XIN YANCHUANG TECHNOLOGY CO., LTD. is identified as a Chinese manufacturer/factory and limited company specializing in metallurgical equipment and one-stop services for steel plants. Evidence indicates ISO 9001 certification, multiple practical patents, technology-enterprise recognition, five production lines, 6–10 quality-control staff, and stated production capacities across several equipment categories. Its operations include R&D, design, production, manufacturing, installation, and commissioning, supported by 11–20 years of R&D engineer experience. The supplier has held self-operated import and export rights since 2018 and serves Middle Eastern and Southeast Asian markets, although exports represent only 1%–10% of total sales. The supplied information supports production, innovation, and integrated project capabilities, but does not provide sufficient evidence for financial credibility, specific customer cases, or the extent of after-sales service and customization performance.
Supplier typeThe supplier is described as both a trade company and a manufacturer/factory, formally organized as a limited company in Fujian, China. Its stated business covers metallurgical equipment manufacturing and one-stop services for steel plants, including R&D, design, production, installation, and commissioning.
CertificationsThe supplier holds ISO 9001 quality management system certification. It is also stated to have received recognition as a technology enterprise from the Fujian provincial science and technology department and to have obtained multiple practical patents.
R&D capabilityThe company emphasizes scientific and technological innovation, and its founder is described as having extensive lifelong involvement in the metallurgy industry and knowledge of medium-frequency furnace steelmaking, continuous casting, and rolling. Supporting evidence includes 11–20 years of total R&D engineer experience, technology-enterprise recognition, multiple practical patents, and continued product development.
Production capacityThe supplier reports five production lines, 6–10 quality-control staff, and stated annual capacities including 300 medium-frequency furnace manipulators, 230 scrap charger vehicles, 10 induction-furnace dedusting projects, 25 baler presses, and 2,000 tons of ladles. These figures directly support established production capability across several metallurgical equipment categories.
Product Q&A
Q:What is the dust capture rate of this system?
A:
The system achieves a dust capture rate of 95% or higher, ensuring no yellow smoke is visible outside the roof.
Q:How many furnaces can the dedusting system handle?
A:
The system is designed to handle 3 sets of 30T induction furnaces, sharing one dedusting unit with adjustable air distribution.
Q:What is the maximum emission level allowed?
A:
The emission level is designed to be less than 25 mg/Nm3, which is strictly below the 50 mg/Nm3 limit.
Q:What is the total exhaust capacity of the system?
A:
The system exhaust capacity is 500,000 m3/h, with a system resistance of 4200 Pa.
Q:How is the collected dust handled?
A:
Dust is collected via gravity for large particles and bag filters for fine particles, then recovered or utilized by the controller.
Send Inquiry
*To:FUJIAN XIN YANCHUANG TECHNOLOGY CO., LTD.
FUJIAN XIN YANCHUANG TECHNOLOGY CO., LTD.*Content:
Supplier replies will be sent to your registered email
You may also like
Intermediate Frequency Induction Furnace for 25 Tons Dedusting System
US$160,000.00-200,000.00
1 Piece(MOQ)
Intermediate Frequency Induction Furnace Bag Filter Dedusting Project
US$180,000.00-1,000,000.00
1 Piece(MOQ)
Aps Industrial Powermatic Dust Collecter for Induction Furnace
US$3,000.00-6,666.00
1 Piece(MOQ)
High Flow Electric Arc Furnace Fume Treatment System for Electric Steelmaking Process
US$20,000.00-70,000.00
1 Set(MOQ)
30 Tons Induction Furnace Dedusting Removal System Project
US$180,000.00-1,000,000.00
1 Piece(MOQ)
Scalable Electric Arc Furnace Dust Collection Plant for Expanding Steel Mills
US$20,000.00-70,000.00
1 Set(MOQ)
High Capacity Electric Arc Furnace Fume Treatment System for Continuous Casting Process
US$25,000.00-60,000.00
1 Set(MOQ)
Dedusting Project 60 Tons Intermediate Frequency Induction Furnace Steelmaking Melting Scrap
US$180,000.00-1,000,000.00
1 Piece(MOQ)
Mobile Electric Arc Furnace Dust Extractor for on-Site Metal Smelting Operations
US$25,000.00-60,000.00
1 Set(MOQ)
Dust Removal for Blast Furnaces in Steel Smelting Expert-Level Solutions
US$800.00-8,000.00
1 Piece(MOQ)
Boiler Flue Gas Treatment / Bag Filter Dust Collector for Coal-Fired Boilers
US$5,000.00
1 Piece(MOQ)
Heavy-Duty Woodworking Cyclone Dust Collector, for Wood Chips
US$800.00-1,000.00
1 Piece(MOQ)
Heavy Duty Carbon Steel Industrial Cyclone Dust Collector for Mining
US$799.00-1,299.00
1 set(MOQ)
Energy Saving Pulse Jet Baghouse Dust Collector for Industrial Dust Control
US$3,000.00-230,000.00
1 Set(MOQ)
Workshop Cleaning Cyclone Dust Collector High Suction Energy Saving
US$1,050.00-1,150.00
1 Piece(MOQ)
Dust Collector System for Concrete Batching Plant
US$900.00-1,200.00
1 Set(MOQ)
Heavy-Duty Dust Collector Workbench with Integrated Polishing Platform
US$3,000.00
1 Piece(MOQ)
