Powered by Made-in-China.com
Air Driven Nitrogen and Purified Helium Gas Booster System to Laboratory
US$3,000.00-4,600.00
1 set
Product profile
Customization
AvailableAfter-sales Service
13 MonthesWarranty
13 MonthesModel NO.
DGS-DGD40He-DGD100N2-W1Max.Head
10-30mMax.Capacity
>400 L/minPressure Medium
GasType
DesktopPosition of Pump Shaft
HorizontalCertification
CE, ISOMaterial
Stainless SteelPower
PneumaticApplication
Increasing Gas Pressure, Transferring and FillingBoost Medium
Nitrogen/HeliumCertificate
CE/ATEX/ISODrive Air Pressure
3-8 BarDrive Air Consumption Flow Rate
1600 L/Min (Maximum)Outlet Pressure (Nitrogen System)
≤ 800 BarOutlet Pressure (Helium System)
≤ 320 BarFilter Accuracy
5 μmTransport Package
1 Set/Case by Plywood CaseSpecification
800*560*680mmTrademark
SUNCENTEROrigin
ChinaHS Code
8414809090Production Capacity
100 Sets/MonthKey features
Dual Pump Independent Control: The two sets of pressurization systems share the same chassis, but the gas inlet, high-pressure outlet and operation are independent. Both pumps can be operated simultan
Wide Driving Air Source Adaptation: Only 3-8 bar of compressed air is required, with a flow rate of 1600 L/min. Ordinary factory air sources can drive it.
High Pressure Output: The nitrogen gas is pressurized to 800 bar, and the helium gas is pressurized to 320 bar, meeting the requirements of the high-pressure process.
Automatic Start/Stop: It will automatically shut down once the preset pressure is reached, and the operation is simple. In case of an emergency, can quickly stop by pressing the red drive air switch.
Sanitation Assurance: The low-pressure inlet is equipped with a 5-micron gas filter, which effectively removes impurities; On the nitrogen pump side, there is an oil mist lubricator (F.R.L).
Safe and Reliable: The entire machine has passed the CE certification and is equipped with an unloading valve for system pressure relief, ensuring the safety of operators.
Company profile
CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service AvailableExport Year: 2013-05-01 CertifiedNearest Port: Guangzhou Port, Shenzhen PortAverage Response Time: >24h CertifiedTerms of Payment: LC, T/T, D/P, etc.
About Our Factory & Business Background
AddressNo. 285, Guantai Road, Yuanwubian, Nancheng District, Dongguan, Guangdong, China
Plant Area2000 square meters
Number of Employees40
Registered Capital1,000,000 RMB
International Commercial Terms(Incoterms)FOB, CIF, CFR, , EXW
Average Lead TimePeak Season Lead Time: one month Off Season Lead Time: within 15 workdays
Our Production Capability & Technical Expertise
Main ProductsHigh Pressure Pumps,Air/Hydro Pressure Testing Machines,Gas filling machines,Valve Testing Machines etc.
Production MachinesAssembly Line, Air Hydraulic Pump
R&D Engineers2 people
Own BrandYes
Our Industry Experience & Global Business Record
Year of Establishment2021-05-26
Main MarketsSouth America, Europe, Southeast Asia/ Mideast
Number of Foreign Trading Staff8
Overseas Agent/BranchNo
Product Q&A
Q:What external air source is required by the system?
A:
We require clean and dry compressed air with a pressure range of 3 to 8 bar, and the supply flow rate should be no less than 1600 liters per minute. Insufficient pressure will result in a slow pressurization speed, while excessive pressure may damage the driving components.
Q:Can the two pumps work simultaneously? Will they interfere with each other?
A:
They can work simultaneously. The gas paths of the two systems are independent and do not interfere with each other. Just ensure that the total driving air flow is sufficient.
Q:How can one determine if the lubrication is functioning properly?
A:
For the DGD100 nitrogen pump, before starting the operation, please check that the oil level in the F.R.L oil cup is at least half full, and adjust the oil dripping speed to 3-5 drops per minute. If the oil cup is empty of oil, the pump will wear out excessively.
Q:Why does the equipment automatically stop once it reaches the set pressure? How to restart?
A:
When the outlet pressure reaches the preset value, the internal pressure switch will cut off the driving air and the pump will automatically stop. To restart, you need to first open the disconnection valve to release the pipeline pressure, and then pull up the driving air switch.
Q:Why is the maximum output pressure of the helium system lower than that of the nitrogen system?
A:
Helium molecules are small and prone to leakage. Moreover, the sealing technology is more demanding, so the designed safety limit is set at 320 bar. Do not attempt to use beyond the rated capacity to avoid danger.
Send Inquiry
*To:Dongguan Suncenter Fluid Pressure Technology Co., Ltd
Dongguan Suncenter Fluid Pressure Technology Co., Ltd*Content:
Supplier replies will be sent to your registered email
You may also like
Two Stages Gas Booster System for CO2, N2, Helium, Argon Gas Filling and Transferring
US$100.00-2,600.00
1 Piece(MOQ)
Suncenter Air Driven Aircraft Tire Inflation Nitrogen Booster System to Airport
US$4,500.00-5,500.00
1 set(MOQ)
Single Action Air Driven Gas Booster System with Valves, Gauges and Pressure Regulators
US$1,415.00-2,600.00
1 Piece(MOQ)
Terek Brand Double Action 200bar Nitrogen Gas Booster System for Cylinder Refilling
US$2,100.00
1 Piece(MOQ)
Suncenter Pneumatic Air Gas Pressure Compressed Booster System
US$100.00-3,000.00
1 set(MOQ)
Terek Brand Best Price 48bar 696psi Nitrogen Gas Booster System for Cylinder Refilling
US$1,800.00-2,100.00
1 Piece(MOQ)
Suncenter No Pump Nitrogen Booster and Filling System for Air Spring Filling to Factory
US$4,500.00-5,500.00
1 set(MOQ)
Terek High Flow Pneumatic CO2 Nitrogen Compressors and Gas Boosters System 1000 Bar Output
US$4,200.00-4,400.00
1 Piece(MOQ)
High Pressure Air Driven Ar He H2 N2 O2 CO2 N2o CH4 LNG LPG CNG FM200 Gas Pump Transfer Cylinder System
US$4,500.00-5,500.00
1 set(MOQ)
Usun Model: Ws-Gbd Double Acting Pneumatic Gas Booster System for Nitrogen /Helium/Argon Gas Refilling
US$2,300.00-2,720.00
1 Piece(MOQ)
Single Action Air Driven Hydrogen Nitrogen Oxygen Carbon Dioxide Gas Booster System with Valves Gauges and Pressure Regulators
US$1,415.00-2,600.00
1 Piece(MOQ)
Usun Model: Us-GB Single Action Air Driven Gas Booster System with Valves, Gauges and Pressure Regulators
US$2,300.00-2,400.00
1 Piece(MOQ)
Usun Model: Us-Gbt/2 Double Stage Gas Booster Pump Systems for Helium /Nitrogen/Argon /Oxygen Gas Refilling
US$2,400.00-2,800.00
1 Piece(MOQ)
Odmt Air Driven Max 800bar Output Gas Pressure Booster Pump System
US$100.00-2,600.00
1 Piece(MOQ)
Usun Model: Us-2agbd60 Max. 9000 Psi Double Drive Double Acting High Pressure Pneumatic Driven Gas Pressure Testing Pump System
US$5,450.00-5,550.00
1 Piece(MOQ)
Terek Air Driven Gas Booster Pump System for Pressure Vessel Test Applications
US$2,100.00-2,500.00
1 Piece(MOQ)
Ig541 Clean Agent Fire Extinguishing System, Fire Protection System
US$1,500.00-3,000.00
5 Sets(MOQ)
Terek Air Driven Gas Booster Pump System for Pressure Vessel Certification
US$1,800.00-2,200.00
1 Piece(MOQ)