Fully Automatic Multi-Head Filling Production Line

This is a common issue for new users, usually caused by three factors: 1 Insufficient material in the hopper or material blockage at the feed inlet (especially for high-viscosity materials); 2 Air trapped in the pipeline (open the exhaust valve to release air or try manual suction); 3Insufficient air pressure (ensure the air pressure reaches 0.4-0.8MPa) or power supply problems (check if the power plug is inserted firmly and the air compressor is turned on). Tip: Run the machine idly 3 times be

Yes. The machine is workbench height is adjustable, and it can adapt to various container shapes and sizes (bottle diameter 5-25mm, product height 50-200mm) by replacing the filling nozzle. It is suitable for bottles, cans, tubes, and other regular containers commonly used in food, medicine, and cosmetics industries.

After each use, disassemble the filling head, hopper, and pipeline, and clean them with clean water or professional cleaning agents (avoid corrosive agents) to prevent material residue from affecting subsequent use. Regularly check the air cylinder, air pipe, and seals for air leakage, and replace worn parts in time. The pneumatic components have few electronic parts, making maintenance simple and reducible downtime.

Abnormal noise is usually caused by insufficient lubrication of moving parts or loose screws. First, cut off the power and air supply, then add lubricating oil to the piston and cylinder, and tighten all loose screws. If the noise still exists, check if the air cylinder is damaged and contact after-sales service for maintenance.

The machine comes with a 1-year warranty. During the warranty period, we provide free spare parts (excluding shipping costs) for damage caused by quality issues. We also offer online video guidance, operation manuals, and technical support for life. If you encounter problems, send photos or videos of the faulty parts, and we will provide solutions or send spare parts in time.