Question 1

Do you manufacture 100% genuine carbon fiber? What grades of raw fiber do you use?

Accepted Answer

Yes, we strictly manufacture 100% genuine carbon fiber plates and tubes. Our standard sheets are pressed using hig

Question 2

What is the maximum thickness and plate size you can press in-house?

Accepted Answer

Our raw carbon fiber plates are hot-press molded completely in-house. We can press sheets with thicknesses ranging from 0.5mm to 120.0mm. Our maximum sheet dimensions are 4.0 meters (Length) x 2.0 meters (Width), which is ideal for oversized structural panels or large-format automotive, marine, and industrial chassis.

Question 3

What are your achievable CNC milling and thickness tolerances?

Accepted Answer

We operate two levels of CNC machining centers to meet different structural requirements:
For Ultra-Precision Parts (up to 1.2m length): We achieve standard machining tolerances of +- 0.05mm and precision-grade tolerances down to +- 0.03mm. Thickness consistency is strictly controlled during raw plate pressing.
For Large-Format Projects (up to 4.0m x 2.0m table size): We maintain a single-sided machining tolerance of +- 0.1mm and a double-sided tolerance of +- 0.1mm to +- 0.2mm.

Question 4

How do you prevent edge delamination and burrs during high-speed CNC routing?

Accepted Answer

Delamination (interlayer splitting) is the biggest failure point for composite parts. We prevent this through:
Optimized Resin-to-Fiber Ratio: Ensuring extremely high interlayer shear strength during plate pressing.
Specialized Tooling: Using custom-coated diamond/carbide compression routers designed specifically for carbon fiber.
Spindle Speed & Feed Control: Carefully programming feed rates and spindle speeds on our multi-axis routers to ensure a clean, smooth, and burr-free edge finish.

Question 5

Can you perform custom edge-chamfering (beveling) and countersunk holes?

Accepted Answer

Yes. We can perform custom 45-degree and round edge-chamfering (beveling) of various depths to make the edges smooth to touch. We also perform high-precision countersinking (milled sinkholes) strictly according to your mechanical drawings, ensuring screws sit flush with the carbon plate surface.

Question 6

Do you supply carbon fiber tubes, and can they be custom-shaped?

Accepted Answer

Yes. We manufacture high-strength, roll-wrapped carbon fiber tubes. We offer:
Shapes: Round, square, rectangular, oval, and telescopic tubing systems.
CNC Processing on Tubes: We can precision CNC-drill holes, cut slots, and mill shapes on carbon tubes to fit your anodized aluminum connectors and mounting brackets.

Question 7

What CAD drawing file formats do you accept for quoting and production?

Accepted Answer

For 3D models (ideal for CNC evaluation, fitment check, and quotes), we accept: .STP, .STEP, and .IGS. For 2D flat layouts (ideal for flat plate cutting and profiling), we accept: .DXF and .DWG.

Question 8

How do you guarantee the confidentiality of our proprietary CAD drawings?

Accepted Answer

We strictly respect and protect our clients' intellectual property. We are fully prepared to sign a Non-Disclosure Agreement (NDA) before you send any drawings. All drawings are restricted to our internal engineering and CNC programming teams, and we never share client-designed parts on public channels without written consent.

Question 9

What manufacturing processes do you use for 3D/complex custom-shaped parts ?

Accepted Answer

We primarily utilize two high-performance molding processes depending on your design requirements, quantity, and budget:
Compression Molding: Pre-preg carbon fiber is placed in matched metal molds and cured under high pressure and temperature. This is ideal for medium-to-high volume production requiring high dimensional consistency and double-sided smooth finishes.
Autoclave Molding: Pre-preg is laid up in a single-sided mold, vacuum-bagged, and cured under precise pressure and temperature. This

Question 10

How do you handle mold tooling costs , and who owns the mold?

Accepted Answer

Ownership: The mold tooling is 100% owned by the client once the tooling fee is paid. We strictly protect your proprietary designs and will never use your mold for other clients.
Maintenance: We provide free lifetime storage and routine maintenance/cleaning for your molds in our facility.
Cost Efficiency: For R&D or low-volume projects, we can offer cost-effective temporary/aluminum molds to lower your initial capital expenditure. For mass production, we recommend hardened steel molds.

Question 11

What is the tolerances for molded 3D shapes?

Accepted Answer

Tolerances: Raw molded parts typically achieve a tolerance of +-0.1mm to +-0.2mm directly out of the mold. For critical mating areas or hole positions, we use multi-axis CNC routers to post-process the parts, achieving final dimensions within +-0.05mm.

Question 12

What is the surface finish options for molded 3D shapes?

Accepted Answer

Surface Finish: We can deliver Raw-from-Mold matte/glossy finishes, or custom clear-coated surfaces (matte/glossy) with UV-resistant polyurethane lacquer to prevent yellowing under outdoor conditions. We also support forged carbon (forged pattern) aesthetics.

Question 13

Can you integrate metal inserts (threaded brass/aluminum rivets) or assemble multi-material parts?

Accepted Answer

Yes. We can perform overmolding (co-curing metal inserts during the molding process) or high-strength epoxy bonding post-molding to integrate threaded inserts (rivets, press nuts), aluminum connectors, or hardware brackets into the carbon fiber shaped components. This ensures maximum pull-out strength and torque resistance for heavy-duty drone mounts, robotic arms, or automotive structural joints.

Product profile

Customization

Shape

Raw Materials

Performance

State

Mechanical Property

Material

Fiber Type

Weave

Surface Finish

Tolerances

Transport Package

Specification

Trademark

Origin

HS Code

Production Capacity

Company profile

AI-Powered supplier vetting

Product Q&A

Send Inquiry

You may also like