115640 Dual Screen Depth Sensor for Milling Machine

A dual screen controller shows target depth and actual depth on separate displays side by side, so the operator sees any deviation without switching screens or menus. A single screen controller shows one value at a time or splits one screen into smaller sections. The dual layout reduces eye movement and reaction time during high-speed milling.

Yes, but only in manual mode. You can raise and lower the side plates with manual controls, but automatic leveling is unavailable, which slows production and reduces depth accuracy. You also lose fault codes and diagnostic data. Replace the controller as soon as possible to restore full automatic operation.

Yes, part 115640 fits W1900 and W2000 class milling machines with the LEVEL PRO leveling system. These models share the same controller interface and communication protocol. If you have a different model or a single-screen system, send the serial number and we will confirm.

No. The leveling calibration data - sensor offsets, side plate dimensions, slope settings - is stored in the machine control computer, not in the operator panel. The new controller is a plug-in replacement: connect the cables, power on, and it communicates automatically. No calibration, programming, or parameter setup is required.

Yes, we ship to all those regions and more than 200 countries total. Express takes 5-7 days, air freight 7-15 days, sea freight 30-45 days. Controllers ship in anti-static packaging with screen protection. Our team responds within 5 minutes during working hours, and any fitment, installation, or quality issue is resolved within 48 hours including replacement or refund.