Liquid Thread Sealing Locker Glue Sealer Pipe Thread Sealant Anaerobic Adhesive Threadlocker

The solidification of anaerobic adhesive is influenced by metal materials, temperature, and oxygen-deficient conditions. Generally, at room temperature, the adhesive is initially solidified for 30 minutes (usually not easily twisted by hand) after oxygen deficiency in the thread gap of active metals (copper, iron, steel, etc.), and fully solidified after about 6 hours. It is recommended to put it into use after 24 hours, and the time is extended for inert metals or in winter.

Anaerobic adhesive only solidifies under anaerobic conditions, and the adhesive does not solidify after opening the lid. It can be stored and stored normally. Tanyo anaerobic adhesive has a shelf life of two years.

The characteristic of anaerobic adhesive is anaerobic solidification, so the bottle is designed to be large and needs sufficient oxygen inside to be stored for a long time, but the adhesive inside is sufficient.

If used for thread anti loosening and sealing, both internal and external threads must be made of metal before they can be used; If used for fixing cylindrical parts (such as bearings), the joint surface must be made of metal before they can be used; In short, it can only be used for metal materials, and other materials cannot be bonded.

The thread sealant is available in Blue, Purple, Red, Yellow, and Green. Customized colors are also supported.