What certifications does the equipment have?

The equipment holds CE, ISO9001, and SGS certifications, and complies with food contact safety standards such as GB 4806.10-2016.

Auto Oil-Water Separation Energy-Saving Tims Oven Enamel Coating Machine

Name: Auto Oil-Water Separation Energy-Saving Tims Oven Enamel Coating Machine
Brand: Dongguan Tims Automatic Equipment Co., Ltd.
SKU: 2250113325

Guangdong, ChinaDongguan Tims Automatic Equipment Co., Ltd.

US$5,000.00-2,000,000.00

1 Set

Product profile

Customization

Available

Application

Appliance Industry

Coating Type

Anti-corrosion Coating

Heating system

Diesel, electric, gas, LPG

Warranty

One-Year Warranty

Enamel Layer Thickness

60-100μm (Flat Workpieces) 80-120μm (Cavity Workpi

Firing Temperature

820-900℃ (Optimal Range for Enamel Fusion)

Temperature Control Accuracy

±2℃

Temperature Uniformity Within The Furnac

≤±5℃

Firing Time

3-6min (Adjusted Based on Workpiece Thickness)

Power Supply

440V/380V/50Hz/60Hz Three-Phase AC (Customizable)

Certifications & Warranty

CE ISO9001 SGS

Pre-Treatment Film Thickness

4-6μm (Adhesion ≥5n/Cm)

Surface Moisture Content After Drying

≤0.5%

Energy Consumption Per Unit Product

≤6.5 Kw·H / Piece

Furnace Thermal Efficiency

≥86% (Includes Waste Heat Recovery)

Materials

Cold-Rolled Carbon Steel / Stainless Steel

Oil Residue After Degreasing

≤5 Milligram Per Square Meter

Total Installed Power

150-2000kw (Customizable)

Transport Package

Cartons/Waterproof Plastic Film/Wooden Pallets

Specification

custom

Trademark

Tims

Origin

Dongguan, China

HS Code

8424899990

Production Capacity

76sets/ Year

Key features

Dual-Mode Coating System: Combines electrostatic and roller coating for uniform coverage on flat and irregular oven parts.

High Energy Efficiency: Reduces energy consumption by 40% via waste heat recovery and composite insulation layers.

Full Automation: One-touch model switching and unmanned operation reduce labor costs by 85%.

Oil-Water Separation: Reduces degreasing agent and rinse water consumption by approximately 50%.

High Qualification Rate: Component qualification rate exceeds 99.6% with precise coating and firing control.

Quality Traceability: Records coating and firing data for over 1 year with QR code traceability for each part.

Modular Design: Easily expandable modules allow capacity increases without replacing the entire production line.

Company profile

Cooperated with Fortune 500Patents AwardedManagement Certification100% Finished Products Inspection

Dongguan Tims Automatic Equipment Co., Ltd.

Guangdong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 12 Years CertifiedNearest Port: Shenzhen Port, Guangzhou PortAverage Response Time: ≤2.25h

AI-Powered supplier vetting

SummaryThe supplier is a professional manufacturer and service provider of high-end enamel equipment, intelligent enamel and coating production lines, spraying systems, high-temperature firing equipment, robotic automation, and other non-standard automation equipment. It provides 3D design, OEM, ODM, and multiple customization services, with raw-material traceability, 100% finished-product inspection, ISO9001:2015 certification, and documented corrective-action and complaint-handling procedures. Manufacturing capacity is supported by valid contracts with associated subcontractors and in-stock capability. However, the supplier reports no new products in the past year, has one R&D engineer and no SDK, and lacks overseas agents, branches, warehouses, showrooms, and offline trade-show participation. Financial credibility cannot be positively established because the provided financial records report zero values, while no supporting explanation is given. Customer-case evidence is limited: it reports OEM service for...

Supplier typeThe supplier describes itself as a professional company engaged in R&D, manufacturing, sales, and service for high-end enamel equipment, intelligent enamel and coating production lines, spraying and firing equipment, robotic automation, and other non-standard automation equipment. This supports classification as an industrial equipment manufacturer and integrated engineering/service supplier.

CertificationsThe supplier holds an ISO9001:2015 management-system certificate. This is explicit evidence of a recognized quality-management certification, although no additional certifications are provided.

After-Sales capabilityThe supplier has documented corrective and preventive action and customer-complaint procedures with records, and offers service quotation terms including FOB, CIF, CFR, and EXW. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and overseas service coverage of zero countries, so international onsite support appears limited.

R&D capabilityThe supplier provides R&D-related 3D software design, ODM, OEM, and customization services. Conversely, it reports no new products in the past year, has one R&D engineer, and has no available SDK, indicating limited evidence of recent product innovation and software-platform capability.

Production capacityThe supplier operates in industrial equipment manufacturing, reports valid manufacturing-capacity contracts with each associated subcontractor, maintains in-stock capability, and performs 100% finished-product inspection. Raw-material traceability is also available, supporting evidence of controlled production capability.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization, together with 3D software design, ODM, and OEM services. The breadth of stated options supports strong customization capability.

Product Q&A

Q:What is the production lead time for the equipment?

The standard production cycle for a complete coating line is 30-70 days. Special configurations may require a detailed timeline after technical confirmation.

Q:What information is needed to get a quote?

Please provide workpiece type, dimensions, weight, expected daily output, coating process, curing conditions, and available factory space.

Q:How is the equipment installed and how long does it take?

Engineers provide on-site installation and commissioning, typically taking 30-60 days depending on complexity. The buyer covers travel and accommodation costs.

Q:What after-sales services and warranty are provided?

We offer a 12-month warranty, free wearing parts, remote support within 2 hours, and on-site support for major failures within 5-10 working days.

Q:Can the production line be customized for different oven models?

Yes, the system supports storing over 10 process recipes and allows one-touch switching of workpiece parameters like dimensions and coating thickness.