What certifications does the furnace have?

The furnace holds CE, ISO9001, and SGS certifications, and meets EU Ecodesign and China GB/T 13454-2022 standards for enameled equipment.

Customizable Enamel Firing Furnace with Eco-Friendly Temperature Control Features

Name: Customizable Enamel Firing Furnace with Eco-Friendly Temperature Control Features
Brand: Dongguan Tims Automatic Equipment Co., Ltd.
SKU: 2282230035

Guangdong, ChinaDongguan Tims Automatic Equipment Co., Ltd.

US$5,000.00-2,000,000.00

1 Set

Product profile

Customization

Available

Application

Aerospace Industry, Appliance Industry, Automotive Industry, Construction Industry, Electronics Industry, Furniture Industry

Coating Type

Anti-corrosion Coating

Model NO.

Heating system

Diesel, electric, gas, LPG

Warranty

One-Year Warranty

Firing Temperature Range

800-950°C (Optimal Melting Range for Enamel)

Temperature Control Accuracy

±2°C

Furnace Temperature Uniformity

≤±5°C (at Any Measurement Point)

Applicable Workpieces Categories

Cylindrical /Flat/ Irregularly Shaped Workpieces

Applicable Workpieces Materials

Carbon Steel,/Cast Iron/Stainless Steel/ and Other

Thermal Efficiency of Gas-Fired Models

≥85% (Including Waste Heat Recovery)

Thermal Efficiency of Electric Models

≥90%

Heating Rate

10-20°C/Min(Adjustable as Needed)

Enamel Layer Adhesion

≥5 N/Cm

Production Capacity for Continuous Mode

1-5.0 M/Min (Conveyor Speed)

Production Capacity for Intermittent

1-2 Batches Per Hour (Each Batch 50-100 Units)

Gas Consumption Per Unit

Gas-Fired Models ≤1.2m³ Per Unit

Gas Consumption Per Unit2

Electric Heating Models≤6kw·H Electricity Consumpt

Power Supply

440/380V/50Hz, 220V/60Hz (Customizable)

Certifications

CE, ISO9001, SGS, EU Ecodesign

Transport Package

Cartons/Waterproof Plastic Film/Wooden Pallets

Specification

custom

Trademark

Tims

Origin

China

HS Code

8424899990

Production Capacity

76sets/ Year

Key features

Smart Data Traceability: MES integration records firing curves and energy data per batch for full traceability.

Flexible Production Modes: Supports both continuous (1-5 m/min) and intermittent (1-2 batches/hour) operations.

Advanced Safety Features: Triple safety protection for gas models and dry-burn resistant tubes for electric models.

Lifetime Technical Support: Includes 1-year warranty with lifetime technical support and spare parts supply.

Customizable Power Supply: Power supply is customizable to 440/380V/50Hz or 220V/60Hz based on local standards.

Eco-Friendly Design: Reduces heat loss by 40% and emissions, meeting EU Ecodesign and CE standards.

Company profile

Cooperated with Fortune 500Patents AwardedManagement Certification100% Finished Products Inspection

Dongguan Tims Automatic Equipment Co., Ltd.

Guangdong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 12 Years CertifiedNearest Port: Shenzhen Port, Guangzhou PortAverage Response Time: ≤2.55h

AI-Powered supplier vetting

SummaryThe supplier is a professional manufacturer and service provider of high-end enamel equipment, intelligent enamel and coating production lines, spraying systems, high-temperature firing equipment, robotic automation, and other non-standard automation equipment. It provides 3D design, OEM, ODM, and multiple customization services, with raw-material traceability, 100% finished-product inspection, ISO9001:2015 certification, and documented corrective-action and complaint-handling procedures. Manufacturing capacity is supported by valid contracts with associated subcontractors and in-stock capability. However, the supplier reports no new products in the past year, has one R&D engineer and no SDK, and lacks overseas agents, branches, warehouses, showrooms, and offline trade-show participation. Financial credibility cannot be positively established because the provided financial records report zero values, while no supporting explanation is given. Customer-case evidence is limited: it reports OEM service for...

Supplier typeThe supplier describes itself as a professional company engaged in R&D, manufacturing, sales, and service for high-end enamel equipment, intelligent enamel and coating production lines, spraying and firing equipment, robotic automation, and other non-standard automation equipment. This supports classification as an industrial equipment manufacturer and integrated engineering/service supplier.

CertificationsThe supplier holds an ISO9001:2015 management-system certificate. This is explicit evidence of a recognized quality-management certification, although no additional certifications are provided.

After-Sales capabilityThe supplier has documented corrective and preventive action and customer-complaint procedures with records, and offers service quotation terms including FOB, CIF, CFR, and EXW. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and overseas service coverage of zero countries, so international onsite support appears limited.

R&D capabilityThe supplier provides R&D-related 3D software design, ODM, OEM, and customization services. Conversely, it reports no new products in the past year, has one R&D engineer, and has no available SDK, indicating limited evidence of recent product innovation and software-platform capability.

Production capacityThe supplier operates in industrial equipment manufacturing, reports valid manufacturing-capacity contracts with each associated subcontractor, maintains in-stock capability, and performs 100% finished-product inspection. Raw-material traceability is also available, supporting evidence of controlled production capability.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization, together with 3D software design, ODM, and OEM services. The breadth of stated options supports strong customization capability.

Product Q&A

Q:How long does it take to produce the equipment?

The production lead time depends on customization requirements. For a complete coating line, the standard cycle is 30-70 days. Special configurations may require a detailed timeline after technical plan confirmation.

Q:What information is needed for product procurement?

Please provide: 1) Workpiece type and dimensions; 2) Weight range; 3) Expected daily output; 4) Coating process requirements; 5) Curing conditions; 6) Factory space dimensions.

Q:How is the equipment installed and how long does it take?

We provide turnkey installation by our engineers. Duration is generally 30-60 days depending on complexity. The buyer bears travel, accommodation, and meal costs for engineers.

Q:What after-sales services are provided?

Services include free wearing parts, online training, remote debugging within 2 hours, and on-site support for major failures within 5-10 working days. Spare parts can be delivered within 3-7 days.

Q:What is the warranty period?

All equipment comes with a 12-month warranty from the date of successful commissioning. Faulty components (non-human damage) are repaired or replaced free of charge.