Can the production line be customized for different workpieces?

Yes, the line supports mixed-line production with one-touch switching. It adapts to various shapes like oven liners, door panels, and grill racks using dual-mode coating.

What is the lead time during peak and off-peak seasons?

The average lead time is 1-3 months for both peak and off-peak seasons.

Enamel Coating Line for Optimal Kitchen Oven and BBQ Performance

Name: Enamel Coating Line for Optimal Kitchen Oven and BBQ Performance
Brand: Dongguan Tims Automatic Equipment Co., Ltd.
SKU: 2289461125

Guangdong, ChinaDongguan Tims Automatic Equipment Co., Ltd.

US$5,000.00-2,000,000.00

1 Set

Product profile

Customization

Available

Application

Appliance Industry

Coating Type

Anti-corrosion Coating

Model NO.

Heating system

Diesel, electric, gas, LPG

Warranty

One-Year Warranty

Enamel Layer Thickness

60-100μm (Flat Workpieces) 80-120μm (Cavity Workpi

Firing Temperature

820-900℃ (Optimal Range for Enamel Fusion)

Temperature Control Accuracy

±2℃

Temperature Uniformity Within The Furnac

≤±5℃

Firing Time

3-6min (Adjusted Based on Workpiece Thickness)

Power Supply

440V/380V/50Hz/60Hz

Certifications & Warranty

CE ISO9001 SGS

Pre-Treatment Film Thickness

4-6μm (Adhesion ≥5n/Cm)

Surface Moisture Content After Drying

≤0.5%

Energy Consumption Per Unit Product

≤6.5 Kw·H / Piece

Furnace Thermal Efficiency

≥86% (Includes Waste Heat Recovery)

Transport Package

Cartons/Waterproof Plastic Film/Wooden Pallets

Specification

custom

Trademark

Tims

Origin

Dongguan, China

HS Code

8424899990

Production Capacity

76sets/ Year

Key features

Dual-Mode Coating System: Electrostatic for flat parts and servo roller for curved parts, ensuring 99.6% qualification rate.

High Energy Efficiency: Waste heat recovery system cuts energy use by 40% compared to traditional equipment.

Full Process Automation: Unmanned operation with only 2 staff needed, reducing labor costs by 85%.

Modular & Expandable Design: Easily add units for new product categories without replacing the entire line.

Rapid Model Switching: PLC-controlled one-touch switching adjusts parameters in under 3 minutes.

Strict Quality Traceability: QR code system records all process data for over 1 year for full traceability.

Eco-Friendly Pre-Treatment: Oil-water separation and counter-current rinsing reduce water and chemical use by 50%.

Company profile

Cooperated with Fortune 500Patents AwardedManagement Certification100% Finished Products Inspection

Dongguan Tims Automatic Equipment Co., Ltd.

Guangdong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 12 Years CertifiedNearest Port: Shenzhen Port, Guangzhou PortAverage Response Time: ≤2.25h

AI-Powered supplier vetting

SummaryThe supplier is a professional manufacturer and service provider of high-end enamel equipment, intelligent enamel and coating production lines, spraying systems, high-temperature firing equipment, robotic automation, and other non-standard automation equipment. It provides 3D design, OEM, ODM, and multiple customization services, with raw-material traceability, 100% finished-product inspection, ISO9001:2015 certification, and documented corrective-action and complaint-handling procedures. Manufacturing capacity is supported by valid contracts with associated subcontractors and in-stock capability. However, the supplier reports no new products in the past year, has one R&D engineer and no SDK, and lacks overseas agents, branches, warehouses, showrooms, and offline trade-show participation. Financial credibility cannot be positively established because the provided financial records report zero values, while no supporting explanation is given. Customer-case evidence is limited: it reports OEM service for...

Supplier typeThe supplier describes itself as a professional company engaged in R&D, manufacturing, sales, and service for high-end enamel equipment, intelligent enamel and coating production lines, spraying and firing equipment, robotic automation, and other non-standard automation equipment. This supports classification as an industrial equipment manufacturer and integrated engineering/service supplier.

CertificationsThe supplier holds an ISO9001:2015 management-system certificate. This is explicit evidence of a recognized quality-management certification, although no additional certifications are provided.

After-Sales capabilityThe supplier has documented corrective and preventive action and customer-complaint procedures with records, and offers service quotation terms including FOB, CIF, CFR, and EXW. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and overseas service coverage of zero countries, so international onsite support appears limited.

R&D capabilityThe supplier provides R&D-related 3D software design, ODM, OEM, and customization services. Conversely, it reports no new products in the past year, has one R&D engineer, and has no available SDK, indicating limited evidence of recent product innovation and software-platform capability.

Production capacityThe supplier operates in industrial equipment manufacturing, reports valid manufacturing-capacity contracts with each associated subcontractor, maintains in-stock capability, and performs 100% finished-product inspection. Raw-material traceability is also available, supporting evidence of controlled production capability.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization, together with 3D software design, ODM, and OEM services. The breadth of stated options supports strong customization capability.

Product Q&A

Q:How long does it take to produce the equipment we ordered?

The standard production cycle for a complete coating line is 30-70 days. Special configurations may require a detailed timeline after confirming the technical plan.

Q:What information do I need to provide to discuss product procurement?

Please provide: 1) Workpiece type, 2) Dimensions, 3) Weight range, 4) Expected daily output, 5) Coating process requirements, 6) Curing conditions, and 7) Available factory space dimensions.

Q:How will you install the equipment we ordered? And how long will the installation take?

We provide turnkey installation by engineers. Duration is generally 30-60 days depending on complexity. The buyer bears travel, accommodation, and meal costs for engineers.

Q:What after-sales services do you provide?

Services include free wearing parts, spare parts delivery within 3-7 days, maintenance manuals, online training, remote debugging within 2 hours, and on-site support within 5-10 days for major failures.

Q:What is the warranty period for the equipment?

All equipment comes with a 12-month warranty from the date of successful commissioning, covering free repair or replacement of faulty components (excluding human damage).